Table Of Contents

Send Software Trigger Edge (G Dataflow)

Version:
    Last Modified: March 3, 2017

    Sends the selected trigger to the digitizer.

    You can also call this node to override a misused edge, digital, or hysteresis reference trigger.

    connector_pane_image
    datatype_icon

    session in

    Identifies a particular instrument session.

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    trigger

    The type of trigger to send to the digitizer.

    Name Value Description
    StartTrigger 0 Sends the start trigger to the digitizer.
    ArmReferenceTrigger 1 Sends the arm reference trigger to the digitizer.
    ReferenceTrigger 2 Sends the reference trigger to the digitizer.
    AdvanceTrigger 3 Sends the advance trigger to the digitizer.
    datatype_icon

    session out

    Passes the instrument handle to the next node in the program. This parameter has the same value as session in.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Using with Configure Trigger

    If you called the Software mode of Configure Trigger, call this node when you want the reference trigger to occur. If you have configured an Acquisition Arm Source, an Arm Reference Trigger Source, or an Advance Trigger Source, call this node when you want to send the corresponding trigger to the digitizer.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported


    Recently Viewed Topics