Returns the properties of the waveform generator that are related to creating arbitrary waveforms.
Handle that identifies your instrument session previously allocated by Initialize With Channels.
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Default: No error
Reference to your instrument session to wire to the next node.
Error information.
The node produces this output according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Maximum number of arbitrary waveforms that the waveform generator allows.
On some waveform generators, this value may vary with remaining onboard memory.
Size (number of points) of each waveform, which must be a multiple of a constant quantum value.
This output obtains the quantum value that the waveform generator uses; This means that if the output returns a value of 8, all waveform sizes must be a multiple of 8.
Maximum number of points that the waveform generator allows in a waveform.
On some waveform generators, this value may vary with remaining onboard memory.
Minimum number of points that the waveform generator allows in a waveform.
For some waveform generators, you may need to supply a larger waveform than the value specified by this output.
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported
Web Server: Not supported in VIs that run in a web application