Table Of Contents

Configure RTD Type (G Dataflow)

Version:
    Last Modified: March 3, 2017

    Configures the RTD Type and RTD Resistance properties for an RTD.

    connector_pane_image
    datatype_icon

    session in

    Instrument identifier from previous NI-DMM nodes.

    Default: None

    datatype_icon

    RTD type

    Type of RTD used to measure temperature.

    NI-DMM uses this value to set the RTD Type property.

    Name Description
    Custom Performs Callendar-Van Dusen RTD scaling with the user-specified A, B, and C coefficients.
    Pt3750 Performs scaling for a Pt3750 RTD.
    Pt3851 Performs scaling for a Pt3851 RTD.
    Pt3911 Performs scaling for a Pt3911 RTD.
    Pt3916 Performs scaling for a Pt3916 RTD.
    Pt3920 Performs scaling for a Pt3920 RTD.
    Pt3928 Performs scaling for a Pt3928 RTD.

    Default: Pt3851

    datatype_icon

    RTD resistance

    RTD resistance at 0 degrees Celsius.

    NI-DMM uses this value to set the RTD Resistance property.

    Default: 100 Ω

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    session out

    Instrument identifier for subsequent NI-DMM nodes.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported


    Recently Viewed Topics