Table Of Contents

Configuration Nodes

Version:
Last Modified: January 29, 2018

Use the NI-DCPower Configuration nodes to configure the power supply or source measure unit.

node_icon
Use the NI-DCPower Configuration Information nodes to query configuration information for the power supply or source measure unit.
node_icon
Configures the aperture time on the specified channel(s).
node_icon
Configures auto zero for the device.
node_icon
Enables or disables generation on the specified channel(s).
node_icon
Configures the function that the device attempts to generate for the specified channel.
node_icon
Configures the output resistance that the device attempts to generate for the specified channel(s).
node_icon
Specifies the power line frequency for specified channel(s).
node_icon
Specifies whether to use local or remote sensing of the output voltage on the specified channel(s).
node_icon
Specifies whether to run a single output point or a sequence.
node_icon
Use the NI-DCPower DC Current nodes for changing channel settings when the channel is configured for the DC Current output function.
node_icon
Use the NI-DCPower DC Voltage nodes for changing channel settings when the channel is configured for the DC Voltage output function.
node_icon
Use the NI-DCPower Pulse Current nodes for changing channel settings when the channel is configured for the Pulse Current output function.
node_icon
Use the NI-DCPower Pulse Voltage nodes for changing channel settings when the channel is configured for the Pulse Voltage output function.
node_icon
Use the NI-DCPower Sequence and Advanced Sequence nodes for configuring the SMU with a series of property or attribute values. You must set the source mode to Sequence.
node_icon
Use the NI-DCPower Triggers and Events nodes to configure triggers and events.

Recently Viewed Topics