Table Of Contents

Waveform Nodes (G Dataflow)

Version:
    Last Modified: May 9, 2017

    Create waveforms and access their components.

    node_icon
    Replaces the timestamp value (t0) of each waveform in waveform array with the timestamp value of the waveform at the index position you specify.
    node_icon
    Converts an analog waveform to a digital waveform or digital data.
    node_icon
    Replaces the dt value of each waveform in the waveform array with the dt value of the waveform at the index position you specify.
    node_icon
    Converts a digital waveform or digital data to an analog waveform.
    node_icon
    Returns the ending time value of the specified waveform. The formula this node uses is xf = x0 + duration of the specified waveform.
    node_icon
    Retrieves a subset of a waveform at a specified time or index.
    node_icon
    Creates an array of timestamps based on the specified waveform.
    node_icon
    Returns the X and Y value of a waveform or digital data set.
    node_icon
    Selects one waveform out of an array of analog or digital waveforms by array index or channel name.
    node_icon
    Multiplies the delta t component of the waveform by the specified scale factor, which lengthens or shortens the sample rate of the waveform.
    node_icon
    Computes the duration of the specified waveform using the following equation: duration = (number of samples-1) x dx.
    node_icon
    Create analog waveforms and access their components.
    node_icon
    Create digital waveforms and access their components.
    node_icon
    Convert to and from digital data.

    Recently Viewed Topics