Configures properties of the transmit (Tx) or receive (Rx) signal.
The antenna port to use for this channel.
Your instrument session.
The aggregate gain, in dB, applied to the RF signal.
The carrier frequency, in Hz, of the RF signal.
The rate of the baseband I/Q data in samples per second (S/s).
The channels to configure.
Error conditions that occur before this node runs. This input provides standard error in functionality.
A Boolean that is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.
The error or warning code. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.
The origin of the error or warning. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.
The actual gain, in dB, for this session, coerced to a value supported by the device.
The actual carrier frequency, in Hz, for this session, coerced to a value supported by the device.
The actual I/Q rate, in samples per second (S/s), for this session, coerced to a value supported by the device.
A reference to your instrument session to be passed to the next node.
Error information. This output provides standard error out functionality.
A Boolean that is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error out indicator on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.
The error or warning code. Right-click the error out indicator on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.
The origin of the error or warning. Right-click the error out indicator on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.
Installed By: LabVIEW Communications System Design Suite (introduced in 1.0)
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported
This site uses cookies to offer you a better browsing experience. Learn more about our privacy policy.