Represents waveform data on the diagram, including the start time for the data, a delta t, and the y-value at each measurement point.
- start time (t0)—A timestamp associated with the first measurement point in the waveform.
- delta t (dt)—Time interval, in seconds, between any two points in the waveform.
- Y values—An array of numeric data with one element for each measurement point.
To access these values, use Waveform Properties.
Installed By: LabVIEW Communications System Design Suite (introduced in 1.0)
Where This Node Can Run:
Desktop OS: Windows
FPGA: All devices (only within an FPGA Algorithm)