Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual
Version:

    Resamples input signal x according to delay and dt using an FIR filter implementation. Wire data to the x input to determine the instance to use.

    connector_pane_image
    datatype_icon

    x

    The input signal for resampling. The sampling interval of x is 1.

    datatype_icon

    delay

    Timestamp for y.

    datatype_icon

    dt

    Sampling interval for y.

    datatype_icon

    error in

    Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.

    Default: no error

    datatype_icon

    FIR filter specifications

    Minimum values this node needs to specify the FIR filter.

    datatype_icon

    alias rejection (dB)

    Minimum attenuation level of signal components aliased after any resampling operation. If alias rejection (dB) is less than 48, this node will use 48 instead.

    Default: 120

    datatype_icon

    normalized bandwidth

    Fraction of the new sampling rate that is not attenuated.

    Default: 0.4536

    datatype_icon

    reset?

    Initialization of the internal states. The first time this node runs or when reset? is TRUE, LabVIEW initializes the internal states to zero. When reset? is FALSE, LabVIEW initializes the internal states to the final states from the previous call to this instance of this node. To process a large data sequence consisting of smaller blocks, set this control to TRUE for the first block and to FALSE for continuous filtering of all remaining blocks.

    Default: FALSE

    datatype_icon

    anti-aliasing?

    A Boolean that determines whether the input signal undergoes lowpass filtering when LabVIEW downsamples the signal. If anti-aliasing? is TRUE, this node protects the resampled signal from aliasing. However, the computation requirements increase during resampling.

    Default: TRUE

    datatype_icon

    y

    Resampled signal.

    datatype_icon

    t0

    Time instance for the first sample in y.

    datatype_icon

    error out

    Error information. The node produces this output according to standard error behavior.