Connects a source trigger terminal to a destination trigger terminal.
A trigger terminal connection is characterized by its source terminal, destination terminal, and a synchronization clock. The signal at the destination terminal can be inverted and synchronized to the rising or falling edge of the synchronization clock.
update edge
The synchronization clock update edge on which the connected signal is propagated.
The source and destination terminals must be connected synchronously for this parameter to apply.
sync clock
The clock that synchronizes the destination terminal with the source terminal for this connection.
instrument handle in
The instrument handle that you obtain from the niSync Initialize node.
source terminal
The source trigger terminal to connect to the destination terminal.
destination terminal
The destination trigger terminal to which the source terminal connects.
error in
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default: no error
invert
A Boolean that specifies that the signal at the source terminal should be inverted at the destination terminal.
TRUE |
The signal is inverted at the destination terminal. |
FALSE |
The signal is not inverted at the destination terminal. |
Note
The source and destination must be connected synchronously for the signal to be inverted.
instrument handle out
The instrument handle that you obtain from the niSync Initialize node.
Installed By: LabVIEW Communications System Design Suite (introduced in 1.0)
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported