Table Of Contents

IVI Power Meter Low-Level Measurement Nodes (G Dataflow)

Version:
    Last Modified: October 23, 2017

    node_icon
    Aborts all previously initiated measurements and returns the power meter to the Idle state.
    node_icon
    Returns the result from a previously initiated single or dual channel measurement.
    node_icon
    Returns the result from a previously initiated measurement on a specified channel. Call the IviPwrMeter Initiate node to initiate a measurement before calling this node.
    node_icon
    Initiates a measurement on all enabled channels.
    node_icon
    Queries the instrument to determine the status of the measurement initiated by IviPwrMeter Initiate.
    node_icon
    Takes a measurement value that is returned from one of the Fetch, Fetch Channel, Read, or Read Channel nodes and determines if the value is a valid measurement value or a value indicating that an out-of-range condition occurred.
    node_icon
    Sends a command to trigger the power meter. Call this node if you pass IVIPWRMETER_VAL_SOFTWARE_TRIG for the IviPwrMeter>>Trigger>>Trigger Source [TRG] property or the Trigger Source parameter of the IviPwrMeter Configure Trigger Source [TRG] node.

    Recently Viewed Topics