Table Of Contents

IviDCPwr Configure Triggered Current Limit [TRG] (G Dataflow)

Last Modified: October 24, 2017

Configures the current limit the power supply uses after it receives a trigger.

spd-note-note
Note  

This VI is part of the IviDCPwrTrigger [TRG] extension group.

connector_pane_image
datatype_icon

instrument handle

The instrument handle that you obtain from the IviDCPwr Initialize or IviDCPwr Initialize With Options node. The handle identifies a particular instrument session. Default Value: None

datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

channel name ("CHANNEL1")

Specifies the virtual channel name that you assign to the instrument in the Configuration Utility. Users who want to achieve interchangeability should use a virtual channel name. The virtual channel name should be sufficiently specific to the test system such that it is unlikely to conflict with a physical channel name. Virtual channel names are aliases for instrument-specific channel strings. The instrument-specific channel strings can differ from one instrument to another. Virtual channel names allow you to use and swap instruments without having to change the channel names in your source code. You assign a virtual channel name to an instrument-specific channel through the Configuration Utility. This control accepts virtual channel names you have assigned to the specific instrument you are using. It also accepts the instrument-specific channel names.

Default: "CHANNEL1"

datatype_icon

triggered limit

Specifies the current limit you want the power supply to use after it receives a trigger. The driver sets the IviDCPwr>>Trigger Subsystem>>Triggered Current Limit [TRG] property to this value. Units: amps

Default: 0.0 A

datatype_icon

instrument handle out

The instrument handle that you obtain from the IviDCPwr Initialize or IviDCPwr Initialize With Options node. The handle identifies a particular instrument session. Default Value: None

datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics