Table Of Contents

cRIO-9803 Specifications

Version:
    Last Modified: October 30, 2018

    Definitions

    Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty.

    Characteristics describe values that are relevant to the use of the model under stated operating conditions but are not covered by the model warranty.

    • Typical specifications describe the performance met by a majority of models.
    • Nominal specifications describe an attribute that is based on design, conformance testing, or supplemental testing.

    Specifications are Typical unless otherwise noted.

    Conditions

    Specifications are valid for -40 °C to 70 °C unless otherwise noted.

    Software

    Supported operating system

    NI Linux Real-Time (64-bit), Windows

    USB Ports

    Type

    USB type-C, upward-facing (device) port

    USB interface

    USB 3.1 Gen1, SuperSpeed

    Maximum data rate

    5 Gb/s

    Maximum current from USB downward-facing (host) port

    900 mA

    Memory

    Nonvolatile (SSD)

    Varies

    spd-note-note
    Note  

    Visit ni.com/info and enter the Info Code ssdbp for information about the life span of the nonvolatile memory and about best practices for using nonvolatile memory.

    Form factor

    mSATA, full size

    Maximum supported drive power

    2.9 W (875 mA @ 3.3 V)

    Drive interface

    SATA II

    Read/write performance (sequential)[1]

    150 MB/s

    Table 1. Module Drive Specifications
    Drive Specification Kit Part Number
    785920-01 786677-01
    Drive capacity 64 GB 480 GB
    Flash technology Planar SLC NAND Planar MLC NAND
    Endurance JESD218A Enterprise workload 733 TBW 259 TBW
    100% sequential workload 6,209 TBW 1,417 TBW
    spd-note-note
    Note  

    These specifications are typical at 40 °C operating and storage temperature according to JESD218A and JESD219. Visit ni.com/info and enter the Info Code ssdtemp for more information about the impact of temperature on flash endurance.

    Power Requirements

    Maximum power consumption

    4.5 W (900 mA @ 5 V)

    Power source

    USB bus-powered

    Physical Characteristics

    spd-note-tip
    Tip  

    For two-dimensional drawings and three-dimensional models of the cRIO-9803, visit ni.com/dimensions and search by module number.

    Weight

    370 g (13 oz)

    Dimensions

    30.0 mm × 88.1 mm × 106.9 mm (1.18 in. × 3.47 in. × 4.21 in.)

    Environmental Characteristics

    Temperature and Humidity

    Temperature[2]

    Operating

    -40 °C to 70 °C

    Storage

    -40 °C to 85 °C

    Humidity

    Operating

    10% RH to 90% RH, noncondensing

    Storage

    5% RH to 95% RH, noncondensing

    Ingress protection

    IP40

    Pollution Degree

    2

    Maximum altitude

    5,000 m

    Shock and Vibration

    Operating vibration

    Random

    5 grms, 10 Hz to 500 Hz

    Sinusoidal

    5 g, 10 Hz to 500 Hz

    Operating shock

    30 g, 11 ms half sine; 50 g, 3 ms half sine; 18 shocks at 6 orientations

    Hazardous Locations

    U.S. (UL)

    Class I, Division 2, Groups A, B, C, D, T4; Class I, Zone 2, AEx nA IIC T4 Gc

    Canada (C-UL)

    Class I, Division 2, Groups A, B, C, D, T4; Ex nA IIC T4 Gc

    Europe (ATEX) and International (IECEx)

    Ex nA IIC T4 Gc

    • 1 Drive performance is dependent on operating system, file system, and application.
    • 2 Drive utilization at extreme temperatures may limit storage duration over time. NI recommends the use of SLC based drives for operating and storage environments above 40 °C. Visit ni.com/info and enter the Info Code ssdtemp for more information about the impact of temperature on drive endurance.

    Recently Viewed Topics