Table Of Contents

Mounting Requirements for the cRIO-905x

Version:
    Last Modified: October 29, 2018

    Use the following to ensure you meet the cooling and cabling clearance requirements for mounting cRIO-905x models.

    Allow 25.4 mm (1.00 in) on all sides of the cRIO-905x for air circulation, as shown in the following figure.

    Figure 1. Minimum Spacing Dimensions
    Figure 2. Cabling Clearance
    spd-note-note
    Note  

    The various connector types on C Series modules require different cabling clearances. For a complete list of cabling clearances for C Series modules, visit ni.com/info and enter the Info Code crioconn.

    Figure 3. Ambient Temperature Measurement Location
    1. Measure the ambient temperature here.

    Recently Viewed Topics