Table Of Contents

cRIO-904x Buttons

    Last Modified: August 30, 2018

    Learn more about the buttons of your cRIO-904x.

    Figure 1. cRIO-904x Buttons
    1. USER1 Button
    2. RESET Button
    3. CMOS Reset Button

    USER1 Button

    The cRIO-904x has a general-purpose USER1 button that is user-defined. You can read the state of the USER1 button from your LabVIEW FPGA application.

    RESET Button

    Press the RESET button to reset the processor in the same manner as cycling power.

    The following figure shows the reset behavior of the cRIO-904x.

    Figure 2. Reset Button Behavior

    For more information about using the RESET button for network troubleshooting, see Troubleshooting Network Connectivity.

    CMOS Reset Button

    Press the CMOS reset button to reset the CMOS and the BIOS.

    Recently Viewed Topics