Table Of Contents

User Responsibilities

Version:
    Last Modified: September 6, 2017

    When deploying the safety system, users must:

    • Create and configure the system HMI
    • Define the system response for diagnostics in the User Program
    • Validate and test the safety system prior to deployment
    • Verify the safety response time of the system
    • Document the validation test plan and results to demonstrate 100% test coverage.
    • Change the module's mode to Operational Mode

    When operating the safety system, users must:

    • Monitor the HMI and/or module LEDs
    • Conduct periodic proof tests as required by the application
    • Respond to faults and detected unsafe conditions according to the safety plan
    • Call National Instruments if the Internal Fault LED flashes more than three times then pauses.

    Recently Viewed Topics