Accueil Support Documentation Compatibilité

NI-Industrial Communications for DeviceNet and Microsoft Windows Compatibility

Updated Aug 17, 2020

Aperçu

This page shows supported versions of the NI-Industrial Communications for DeviceNet hardware driver with the Microsoft Windows operating system. Reference this information to ensure you install the correct version when upgrading or updating your operating system, or when migrating or porting code to a new system. Using incompatible versions may result in errors, the inability for Microsoft Windows to recognize or detect and then find a driver for your device, or missing devices in Windows Device Manager or NI Measurement & Automation Explorer (MAX).

Note that this article replaces KnowledgeBase 70K9CFHI : NI-Industrial Communications for DeviceNet and Windows Compatibility. Some NI manuals may still reference the previous document. If you were redirected from the previous KnowledgeBase URL, please update your bookmarks accordingly.

NI-Industrial Communications for DeviceNet and Microsoft Windows Compatibility

Back to top

In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.

Use this table to compare NI-Industrial Communications for DeviceNet and Microsoft Windows Compatibility
NI-IndCom for DeviceNet   Windows Version
Server 2012 R2 (64 bit) Server 2008 R2 (64 bit) Server 2003 R2 (32 bit) Windows 10 Windows 8.1 Windows 8 Windows 7 Windows Vista XP SP3 (32 bit) XP (32 bit)
20.0                    
19.0                    
18.0                    
17.0                    
16.0                    
15.0                    
14.5                    
2.3                    
2.2                    
2.1                    


Please note that NI-DNET is a separate driver, and that NI-Industrial Communications for DeviceNet 2.x is not an update for NI-DNET. The two products can be installed on the same system side by side. DeviceNet 2.1 or later provides NI-DNET 1.x compatible VIs, so an application using NI-DNET 1.VIs can work with DeviceNet 2.1 or later on PCI-8532, PXI-8532 and NI 9882 with very limited code change. Please see the White Paper, linked below, for information on how to migrate DNET applications.

Compatible

Additional Resources

Back to top