NI FlexRIO Driver Supported Versions for FlexRIO Adapters and Modules

Overview


Some NI RS-422/485 products can successfully used at baud rates above 3 MBd. This article provides the instruments capable of baud rates above 3MBd, and their acceptable baud rates.


For information on NI FlexRIO Hardware Compatibility see NI FlexRIO Adapter and NI FlexRIO FPGA Module Compatibility.

Contents

How to Use this Page

  1. Identify your FlexRIO hardware. 
  2. Select which FlexRIO driver you plan to use in your system and follow the corresponding steps:
     

NI FlexRIO Driver: Use the following steps to identify a NI FlexRIO Driver that is compatible with your hardware:

  1. Use the following NI FlexRIO compatibility tables to identify the driver versions compatible with your FlexRIO hardware. If you have a FlexRIO system with modular I/O (FlexRIO Adapter with FlexRIO FPGA Module or Controller for FlexRIO) make sure the driver version is compatible with both. In the Downloads section at the bottom of this page, you can download a copy of these tables that includes older software versions.
  2. Install a compatible version of the NI FlexRIO driver.
     

NI FlexRIO Adapter Module Support Driver: The FlexRIO Adapter Module Support Driver has been deprecated and replaced by the NI FlexRIO Driver. If you are not able to update your system to the NI FlexRIO Driver, use the following steps to identify compatible driver versions for your system:

  1. Download the FlexRIO Adapter Module Driver Supported Versions for FlexRIO Adapters and Modules.xlsx in the Downloads section.
  2. Use the table to identify the driver versions compatible with your FlexRIO Adapter Module.
  3. Install a compatible version of the NI-RIO and NI FlexRIO Adapter Module Support driver.

NI FlexRIO Driver

Use these tables to compare versions of NI FlexRIO to compatible FlexRIO Adapters and Modules
FlexRIO Adapter ModulesNI FlexRIO Version
21.321.020.720.620.120.019.619.519.018.7
NI 5731
NI 5732
NI 5733
NI 5734
NI 5741
NI 5742
NI 5751
NI 5751B
NI 5752
NI 5752B
NI 5753
NI 5761
NI 5762
NI 5771
NI 5772
NI 5781
NI 5782
NI 5783
NI 57911
NI 57921
NI 57931
NI 6581
NI 6581B
NI 6583
NI 6584
NI 6585
NI 6585B
NI 6587
NI 6589

[1] The 579x FAMs use a sample project that is too large to fit on smaller FPGAs

 

 

Controllers for FlexRIONI FlexRIO Version
21.321.020.720.620.120.019.619.519.018.7
NI 7931
NI 7932
NI 7935



FlexRIO Signal Generator ModulesNI FlexRIO Version
21.321.020.720.620.120.019.619.519.018.7
PXIe-5745



FlexRIO Digitizer ModulesNI FlexRIO Version
21.321.020.720.620.120.019.619.519.018.7
PXIe-5763
PXIe-5764
PXIe-5774
PXIe-5775
PCIe-5763
PCIe-5764
PCIe-5774
PCIe-5775



FlexRIO IF Transceiver ModulesNI FlexRIO Version
21.321.020.720.620.120.019.619.519.018.7
PXIe-5785
PCIe-5785



FlexRIO Modules with High Speed SerialNI FlexRIO Version
21.321.020.720.620.120.019.619.519.018.7
PXIe-6593   
PXIe-6594     



FlexRIO Coprocessor ModulesNI FlexRIO Version
21.321.020.720.620.120.019.619.519.018.7
PXIe-7911
PXIe-7912
PXIe-7915



FlexRIO FPGA ModulesNI FlexRIO Version
21.321.020.720.620.120.019.619.519.018.7
PXI-7951
PXI-7952
PXI-7953
PXI-7954
PXIe-7961
PXIe-7962
PXIe-79652
PXIe-7966
PXIe-7971
PXIe-7972
PXIe-7975
PXIe-7976

[2] The size and speed grade of the NI PXIe-7965 makes it difficult to meet timing for higher performance adapter modules.

 

 

FlexRIO Automotive InterfacesNI FlexRIO Version
21.321.020.720.620.120.019.619.519.018.7
PXIe-1486      
PXIe-1487      

Compatible

Was this information helpful?

Yes

No