sbRIO-9237
781209-10
781028-10
Non-Enclosed, 50 kS/s/channel, Bridge Analog Input, 4-Channel C Series Strain/Bridge Input Module
概述
The sbRIO-9237 includes all the signal conditioning required to power and measure up to four bridge-based sensors simultaneously. The module provides strain or load measurements with zero interchannel phase delay. It also has 60 VDC isolation and 1,000 Vrms transient isolation, providing high-common-mode noise rejection and increased safety.
You can program the sbRIO-9237 for use with half-bridge and full-bridge sensors with built-in excitation. The four RJ50 jacks provide direct connectivity to most torque or load cells and offer custom cable solutions with minimal tools. Non-enclosed modules are designed for OEM applications.
sbRIO-9237 詳細資料
料號 (2) 價格 | 781209-10 | 781028-10 |
|---|---|---|
| NI Lead Time | 27-28 weeks | 27-28 weeks |
| Bridge Configurations | Full Bridge#Half Bridge#Quarter Bridge | Half Bridge#Quarter Bridge#Full Bridge |
| Maximum Number of Differential Analog Input Channels | 4 | 4 |
| Conformal Coated | No | No |
| Analog Input Voltage Range | -25 mV/V to 25 mV/V | -25 mV/V to 25 mV/V |
| Enclosed | No | No |
| Maximum Sample Rate | 50 kS/s/ch | 50 kS/s/ch |
| Front Connection Type | D-SUB(1) | RJ50(1) |
| Supported Hardware Platform | CompactRIO | CompactRIO |
| Bridge Resistance | — | 350 Ohm#120 Ohm |
| Number of Analog Input Channels | 4 | 4 |
| Simultaneous Sampling | Yes | Yes |
| Operating Temperature Range | -40 °C to 70 °C | -40 °C to 70 °C |
| Bus Connection | C Series | C Series |
| Analog Input Isolation | 60 VDC Ch-Earth Ground Isolation | 60 VDC Ch-Earth Ground Isolation |
| Supported Sensor Type | Bridge#Strain Gauge | Bridge#Strain Gauge |
| 產品說明 | NI 9237E DSUB 4-Ch 50kS/s/Ch, 24-Bit Bridge AI BOARD-ONLY- QTY 10 | NI 9237E 4-Ch 50kS/s/Ch, 24-Bit Bridge AI Board-Only (QTY 10) |
sbRIO-9237 配件與軟體
- 產品 (料號)說明建議用途FlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.