NI-9235
起始價 $3,665.00
785995-01
10 kS/s/channel, 120 Ω Quarter-Bridge Strain Gage, 8-Channel C Series Strain/Bridge Input Module
概述
The NI-9235 measures dynamic strain on all channels simultaneously, allowing for synchronized, high-speed measurements. This capability is important for applications, such as impact tests, that require comparison across many channels at a particular instant in time.
The NI-9235 includes built-in voltage excitation for quarter-bridge sensors. It also has 60 VDC isolation and 1,000 Vrms transient isolation, providing high-common-mode noise rejection and increased safety.
包含的商品
- Module
- NI 9966 34-position spring terminal plug
- Safety, Environmental, and Regulatory documentation
NI-9235 詳細資料
料號 (1) 價格 | 785995-01 |
|---|---|
| NI Lead Time | 12-13 weeks |
| Bridge Configurations | Quarter Bridge |
| Maximum Number of Differential Analog Input Channels | 8 |
| Conformal Coated | No |
| Analog Input Voltage Range | -29.4 mV/V to 29.4 mV/V |
| Enclosed | Yes |
| Maximum Sample Rate | 10 kS/s/ch |
| Front Connection Type | Spring Terminal(1) |
| Supported Hardware Platform | C Series |
| Bridge Resistance | 120 Ohm |
| Number of Analog Input Channels | 8 |
| Simultaneous Sampling | Yes |
| Operating Temperature Range | -40 °C to 70 °C |
| Bus Connection | C Series |
| Analog Input Isolation | 60 VDC Ch-Earth Ground Isolation |
| Supported Sensor Type | Bridge#Strain Gauge |
| 產品說明 | NI-9235, 8 ch, 120 ohm quarter bridge, 24-bit, 10 kS/s/ch C Series Bridge/Strain Input Module |
NI-9235 配件與軟體
- 產品 (料號)說明建議用途FlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.