PXIe-4302

起价 $4,988.00
产品编号:

24-Bit, 32-Channel, 5 kS/s, ±10 V PXI Analog Input Module

概述

The PXIe-4302 is a filtered input module for voltage, thermocouple, and current measurements. The module has an A/D converter per channel to enable a simultaneous sample rate of 5 kS/s. The PXIe-4302 offers you the ability to select a digital filter per channel to provide extra filtering performance. You also can operate up to four different sample rates and triggering configurations concurrently to ensure you measure every sensor as needed. The included NI-DAQmx driver simplifies hardware configuration and measurement.

内含品

  • Module
  • Safety, Environmental, & Regulatory documentation
产品编号 (1) 价格
783865-01

NI Lead Time
12-13 weeks
Maximum Sample Rate
5 kS/s/ch
Analog Input Voltage Range
-0.1 V to 0.1 V
-10 V to 10 V
Analog Input Isolation
—
Maximum Number of Differential Analog Input Channels
32
Analog Input Resolution
24 bits
Discrete Low-Pass Filter
2 Hz
20 Hz
200 Hz
1 kHz
2 kHz
Filtering
Anti-Alias
Bus Connection
PXI Express
Maximum Number of Single-Ended Analog Input Channels
—
Simultaneous Sampling
Yes
Analog Input Absolute Accuracy
4362 μV
Analog Input Maximum Absolute Accuracy
—
Number of Analog Output Channels
—
Number of Current Output Channels
—
Number of Voltage Output Channels
—
Analog Output Resolution
—
Maximum Analog Update Rate
—
Analog Output Voltage Range
—
Output Current Range
—
Analog Output Isolation
—
Number of Bidirectional Digital Channels
—
Digital I/O Logic Levels
—
Number of Counters/Timers
—
Reconfigurable
—
Front Connection Type
DIN(1)
Operating Temperature Range
0 °C to 55 °C
产品描述
NI PXIe-4302 +/-10V, 32-Ch, 24-bit, 5kS/s/ Voltage Input Module
Request Your PXI Demo: Go from Bench Setup to Automated Test in One Workflow

PXIe-4302 附件和软件

  • 型号 (产品编号)
    说明
    图片
    兼容产品编号
    RM-4302 (783872-01)
    RM-4302, Rackmount TB for PXIe-4302/3 with in situ calibration

    附件
    783865-01
    查看产品详情
    TB-4302 (783869-01)
    TB-4302, Front mount terminal block for PXIe-4302/3

    附件
    783865-01
    查看产品详情
    TB-4302 (783871-01)
    TB-4302C,Current input front mount terminal block for PXIe-4302/3

    附件
    783865-01
    查看产品详情
  • 型号 (产品编号)
    说明
    图片
    兼容产品编号
    SH96-96-2 (157350-05)
    SH-96-96-2, Cable for PXIE-4302, PXIE-4303, and PXIE-4339 to Rackmount Terminal Blocks, 5 Meters

    附件
    783865-01
    查看产品详情
    SH96-96-2 (157350-03)
    SH-96-96-2, Cable for PXIE-4302, PXIE-4303, and PXIE-4339 to Rackmount Terminal Blocks, 3 Meters

    附件
    783865-01
    查看产品详情
    SH96-96-2 (157350-01)
    SH-96-96-2, Cable for PXIE-4302, PXIE-4303, and PXIE-4339 to Rackmount Terminal Blocks, 1 Meter

    附件
    783865-01
    查看产品详情
  • 产品 (产品编号)
    说明
    推荐用例
    FlexLogger Professional (785748-3501)
    FlexLogger Professional, Subscription License, Download

    Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.

    Key Features

    • Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
    • Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
    • Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
    • Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
    • Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
    • Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
    • CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
    查看产品详情
    LabVIEW+ Suite (788509-35)
    NI LabVIEW+ Suite, Subscription License, Download

    Recommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.

    The LabVIEW+ Suite includes the following products:

    • NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
    • NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
    • NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
    • NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
    • NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
    查看产品详情

支持