NI-9313
起价 $900.00
789188-01
16-Channel, 1 S/s per channel, ±78 mV C Series Temperature Input Module
概述
The NI-9313 is a high-density thermocouple input module that is designed for higher channel count systems. With this module, you can add thermocouples to mixed-signal test systems without taking up too many slots. The NI-9313 includes anti-aliasing filters, open-thermocouple detection, and cold-junction compensation for high-accuracy thermocouple measurements. The NI-9313 features NIST-traceable calibration and a channel-to-earth ground double isolation barrier for safety, noise immunity, and high common-mode voltage range.
内含品
- Module
- Safety, Environmental, & Regulatory documentation
NI-9313 详细信息
产品编号 (1) 价格 | 789188-01 |
|---|---|
| NI Lead Time | 12-13 weeks |
| Maximum Number of Differential Analog Input Channels | 16 |
| Conformal Coated | No |
| Enclosed | Yes |
| Supported Sensors | All Standard Thermocouples |
| Analog Input Isolation | 250 Vrms Ch-Earth Ground Isolation |
| Example of Measurement Accuracy | 0.77 °C |
| Maximum Sample Rate | 1 S/s |
| Front Connection Type | Spring Terminal(1) |
| Supported Hardware Platform | C Series |
| Number of Analog Input Channels | 16 |
| Analog Input Voltage Range | -78125 mV to 78125 mV |
| Simultaneous Sampling | No |
| Operating Temperature Range | -40 °C to 70 °C |
| Bus Connection | C Series |
| Supported Sensor Type | Thermocouple |
| 产品描述 | NI 9313 Spring Terminal, 16 Channel Thermocouple, 24-BIT, C Series Module |
NI-9313 附件和软件
- 产品 (产品编号)说明推荐用例FlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.