NI-9216
起价 $1,899.00
783863-02
785186-01
783863-01
8-Channel, 400 S/s Aggregate, 0 Ω to 400 Ω, PT100 RTD C Series Temperature Input Module
概述
The NI-9216 is a resistance temperature detector (RTD) input module. You can configure the NI-9216 for two sample rate modes: high sample rate or high resolution. The NI-9216 is compatible with 3- and 4-wire RTD measurements, and it automatically detects the type of RTD (3--or 4-wire) connected to the channel and configures each channel for the appropriate mode. The module provides per channel current excitation. The NI-9216 features calibration and includes a channel-to-earth ground double isolation barrier for safety, noise immunity, and a high common-mode voltage range.
内含品
- Module
- NI-9974 36-position spring terminal plug
- Safety, Environmental, & Regulatory documentation
NI-9216 详细信息
产品编号 (3) 价格 | 783863-02 | 785186-01 | 783863-01 |
|---|---|---|---|
| NI Lead Time | 12-13 weeks | 12-13 weeks | 12-13 weeks |
| Maximum Number of Differential Analog Input Channels | 8 | 8 | 8 |
| Conformal Coated | Yes | No | No |
| Enclosed | Yes | Yes | Yes |
| Supported Sensors | PT100 RTD | PT100 RTD | PT100 RTD |
| Analog Input Isolation | 60 Vrms Ch-Earth Ground Isolation | 250 Vrms Ch-Earth Ground Isolation | 60 Vrms Ch-Earth Ground Isolation |
| Example of Measurement Accuracy | 0.15 °C | 0.15 °C | 0.15 °C |
| Maximum Sample Rate | 400 S/s | 400 S/s | 400 S/s |
| Front Connection Type | D-SUB(1) | Spring Terminal(1) | D-SUB(1) |
| Supported Hardware Platform | C Series | C Series | C Series |
| Number of Analog Input Channels | 8 | 8 | 8 |
| Analog Input Voltage Range | — | — | — |
| Simultaneous Sampling | — | — | — |
| Operating Temperature Range | -40 °C to 70 °C | -40 °C to 70 °C | -40 °C to 70 °C |
| Bus Connection | C Series | C Series | C Series |
| Supported Sensor Type | RTD#Bridge#Thermocouple | RTD#Bridge#Thermocouple | RTD#Bridge#Thermocouple |
| 产品描述 | NI-9216, 8-Ch, 50S/s/ch, 24-Bit, PT100 RTD, Conformal-Coated | NI 9216 Spring, 8-Ch RTD, PT100, 24-bit, 50S/s/ch AI module | NI 9216 DSUB, 8-ch PT100 RTD, 50S/s/ch, Analog Input Module |
NI-9216 附件和软件
- 产品 (产品编号)说明推荐用例FlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
