FD-11614
起价 $4,567.00
790064-01
16-Channel Temperature Input Device for FieldDAQ
概述
The FD-11614 measures up to 16 thermocouple channels. It features cold-junction compensation and open thermocouple detection with an LED indicator per channel to identify disconnected thermocouples. The FD-11614 has an ingress protection rating up to IP67 (dust- and water-resistant), can operate in -40 °C to 85 °C environments, and can sustain 100 g shock and 10 g vibration. The FD-11614 provides precise, synchronized timing over the network using Time Sensitive Networking (TSN), ideal for highly distributed measurements over long distances. The device features an integrated network switch for simple daisy-chaining. You program the FD-11614 with NI-DAQmx, which automatically synchronizes multiple FieldDAQ™ devices. This device is ideal for test cell and outdoor environments.
内含品
- Device
- Safety, Environmental, and Regulatory documentation
FD-11614 详细信息
产品编号 (1) 价格 | 790064-01 |
|---|---|
| NI Lead Time | 10-11 weeks |
| Maximum Number of Differential Analog Input Channels | 16 |
| Conformal Coated | No |
| Enclosed | Yes |
| Maximum Sample Rate | 85 S/s/ch |
| Simultaneous Sampling | Yes |
| Electrical Signal Measured | Voltage |
| Supported Sensor Type | Thermocouple |
| Front Connection Type | M12 X-coded(2)#M12 L-coded(2)#Miniature Thermocouple (mini-TC)(16) |
| Supported Hardware Platform | Computer-Based Device |
| Number of Analog Input Channels | 16 |
| Analog Input Voltage Range | -78.125 mV to 78.125 mV |
| Operating Temperature Range | -40 °C to 85 °C |
| Bus Connection | Ethernet |
| Analog Input Isolation | 60 VDC Ch-Ch Isolation |
| Example of Measurement Accuracy | 0.31 °C |
| 产品描述 | FD-11614, IP65/67, 16ch Universal Thermocouple Input, MiniTC, 24-bit Temperature Input |
FD-11614 附件和软件
- 型号 (产品编号)说明图片兼容产品编号SHM128M-RJ45 (785944-01)IP67 Gigabit Ethernet, Shielded X-Code M12 Male to RJ45 (Straight), 1M for FieldDAQ790064-01SHM128M-SHM128M-RA (785945-0R3)IP67 Gigabit Ethernet, Shielded X-Code M12 Male to Shielded M12 Male (Right Angle) 0.3M for FieldDAQ790064-01SHM128M-SHM128M (785946-01)IP67 Gigabit Ethernet, Shielded X-Code M12 Male to Shielded M12 Male (Straight), 1M for FieldDAQ790064-01SHM128M-RJ45-RA (786171-01)IP67 Gigabit Ethernet, Shielded X-Code M12 Male to RJ45 (Right Angle), 1M for FieldDAQ790064-01M125F-M125M (786173-01)IP67, Power, L-Code M12 Female to L-Code M12 Male (Straight), 1M for FieldDAQ790064-01
- 型号 (产品编号)说明图片兼容产品编号IP67 Power Supply (147464-01)IP67 Power Supply, 24 VDC, 5 A, 100-240 VAC Input790064-01
- 产品 (产品编号)说明推荐用例FlexLogger Professional (785748-3501)FlexLogger Professional, Subscription License, Download
Recommended for automated, extensible data logging with NI data acquisition (DAQ) hardware. Automate tests using alarms, triggers, and events, and expand capabilities with plug-ins.
Key Features
- Multichassis synchronization—Synchronize multiple NI chassis for accurate, time-aligned measurements across high channel counts.
- Logging triggers—Start, stop, or segment data recording automatically based on sensor thresholds or other conditions to capture only what matters.
- Events—Respond to specific occurrences during a test, such as activating equipment when a condition is met (for example, start cooling fans when temperature exceeds a limit).
- Automation APIs—Control and monitor FlexLogger from external applications (Python, NI LabVIEW, or NI TestStand), enabling integration into larger automated test systems.
- Calculation channels—Perform real-time math on acquired data (averages, RMS, custom formulas) to track derived measurements as the test runs.
- Plug-ins—Extend FlexLogger with custom LabVIEW or Python plug-ins to integrate third-party hardware, perform custom analysis, or connect to lab systems.
- CAN/LIN logging—Acquire and log automotive network data alongside sensor measurements for complete vehicle or subsystem testing.
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
