PXI-5651
779670-01
3.3 GHz PXI RF Analog Signal Generator
概述
The PXI-5651 features continuous-wave generation capabilities with FM, 2-FSK, or OOK modulation. It uses direct digital synthesis (DDS) for high-resolution frequency hopping or phase-continuous sweeping for fixture and device characterization applications. The PXI-5651 is ideal for clocking nonstandard sample rates, such as WCDMA signals at baseband or intermediate frequency (IF). With these versatile signal generators, you can perform analog and digital modulation through the onboard DDS circuit, which gives you frequency modulation and frequency-shift keying for applications such as bit error rate test, antenna testing, or even keyless entry. You can also perform amplitude modulation using on-off keying.
PXI-5651 详细信息
产品编号 (1) 价格 | 779670-01 |
|---|---|
| NI Lead Time | — |
| Analyzer Tuning Time (Typical) | 1.5 ms |
| RF Generator Frequency Range | 500 kHz to 3.3 GHz |
| Maximum Output Power | 12 dBm |
| Generation Phase Noise Level | -110 dBc/Hz phase noise at 1 GHz offset (10 kHz) |
| Number of Output Channels | 1 |
| 产品描述 | NI PXI-5651 3.3 GHz RF Signal Generators and CW Source |
PXI-5651 附件和软件
- 产品 (产品编号)说明推荐用例LabVIEW Professional (784584-35)LabVIEW Professional Development System, Windows, All Languages, Subscription License, Download
Recommended for test, measurement, automation, and control applications; NI LabVIEW enables engineers to quickly connect to real-world systems, accelerate their productivity, and adapt to any challenge. LabVIEW provides the following capabilities:
- Connectivity to any Instrument regardless of vendor
- A native user interface for monitoring and controlling test
- Thousands of engineering analysis functions
- Seamless interoperability popular programming languages, such as Python, C, and .NET
LabVIEW+ Suite (788509-35)NI LabVIEW+ Suite, Subscription License, DownloadRecommended for engineers building full test and validation systems where modular code development and higher-level frameworks are needed to accelerate development for shorter time to market.
The LabVIEW+ Suite includes the following products:
- NI LabVIEW—Provides a graphical programming environment for test system development, enabling connectivity to any instrument and fully integrated user interfaces.
- NI TestStand—Eliminates the need for time-intensive in-house sequencer development and maintenance by providing an off-the-shelf test management software for validation and production test.
- NI DIAdem—Saves engineers hundreds of hours of manual data analysis and report creation with automation.
- NI FlexLogger™ software—Simplifies data acquisition and data logging with interactive measurement setup for NI DAQ hardware.
- NI InstrumentStudio™ software—Provides a central location for configuration, measurement, and automation.
RFmx General-Purpose Bundle (790556-35)RFmx General Purpose Bundle, Development, Subscription License, DownloadRecommended for RF signal generation and analysis with NI RF instrumentation, including PXI Vector Signal Transceivers, PXI RF Signal Generators, PXI Vector Signal Analyzers, and PXI Vector Network Analyzers.
Key Workflows
- Interactive measurements—Quickly set up RF signal generation and analysis with NI InstrumentStudio™ software Soft Front Panels, with customized panels based on RFmx personality.
- Standard-compliant waveform creation—Build custom waveforms for general-purpose or custom applications, or utilize preconfigured, standard-compliant waveforms for 5G NR, LTE, Wi-Fi, and many more.
- Automate with powerful APIs—Leverage APIs in NI LabVIEW, C#, and Python for customized measurement IP for complex RF applications and start automation faster with programming examples.