Archived: Traditional NI-DAQ (Legacy) Driver Support: Plug and Play ISA/PC/AT

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Overview



The following table lists the latest DAQ driver that is supported for various NI Plug and Play ISA/PC/AT data acquisition devices. The table also shows which driver can be used with Windows, Linux, Real-Time or Mac OS X.

Note: This page is about NI-DAQ also known as Traditional NI-DAQ (Legacy). NI-DAQmx replaced Traditional NI-DAQ (Legacy) in 2003. NI strongly recommends using NI-DAQmx for new designs and migrating existing Traditional NI-DAQ (Legacy) applications to NI-DAQmx. Please review the Getting Started with NI-DAQmx guide for more information on migration.

Contents

Table Key 

 BDevice works with NI-DAQmx Base
 TDevice works with Traditional NI-DAQ (Legacy)
 mxDevice works with NI-DAQmx
 NSDevice works with NI-Switch
 XNot Supported
 *AI only

 

Traditional NI-DAQ (Legacy) Device or Module Support for Windows, LabVIEW RT, Linux and Mac OS

Use this table to identify Traditional NI-DAQ (Legacy) Support with Drivers, Modules and OS
DeviceWindowsLabVIEW RTLinuxMac
E Series Multifunction DAQVista x64Vista x86XP2000NT 298/Me95Pharlap4Linux3OS X
NI-6011E (NI AT-MIO-16-XE-50)XX7.4.4T7.4.4T7.4T7.1T6.9.3T7.4.4TXX
NI 6020E (NI AT-MIO-16E-10)XX7.4.4T7.4.4T7.4T7.1T6.9.3T7.4.4TXX
NI 6021E (NI AT-MIO-16DE-10)XX7.4.4T7.4.4T7.4T7.1T6.9.3T7.4.4TXX
NI 6030E (NI AT-MIO-16XE-10)XX7.4.4T7.4.4T7.4T7.1T6.9.3T7.4.4TXX
NI 6032E (NI AT-AI-16XE-10)XX7.4.4T7.4.4T7.4T7.1T6.9.3T7.4.4TXX
NI 6060E (NI AT-MIO-16E-2)XX7.4.4T7.4.4T7.4T7.1T6.9.3T7.4.4TXX
NI 6061E (NI AT-MIO-64E-3)XX7.4.4T7.4.4T7.4T7.1T6.9.3T7.4.4TXX
NI 6070E (NI AT-MIO-16E-1)XX7.4.4T7.4.4T7.4T7.1T6.9.3T7.4.4TXX
Multifunction DAQVista x64Vista x86XP2000NT 298/Me95Pharlap4Linux3OS X
NI Lab-PC-1200XX6.9.3T6.9.3T6.9.3T6.9.3T6.9.3T6.9.3TXX
NI Lab-PC-1200AIXX6.9.3T6.9.3T6.9.3T6.9.3T6.9.3T6.9.3TXX
NI PC-LPM-16PNPXX6.9.3T6.9.3T6.9.3T6.9.3T6.9.3T6.9.3TXX
NI PC-516XX6.9.3T6.9.3T6.9.3T6.9.3T6.9.3T6.9.3TXX
Analog OutputVista x64Vista x86XP2000NT 298/Me95Pharlap4Linux3OS X
NI PCAO-2DCXX6.9.3T6.9.3T6.9.3T6.9.3T6.9.3T6.9.3TXX
Digital Input/OutputVista x64Vista x86XP2000NT 298/Me95Pharlap4Linux3OS X
NI AT-6533XX7.4.4T7.4.4T7.4T7.1T6.9.3T7.4.4TXX
NI PC-DIO-24PNPXXX7.4.4T7.4T7.1T6.9.3T7.4.4TXX
NI PC-DIO-96PNPXX7.4.4T7.4.4T7.4T7.1T6.9.3T7.4.4TXX
NI PC-OPDIO-16XX6.9.3T6.9.3T6.9.3T6.9.3T6.9.3T6.9.3TXX
Modular InstrumentsVista x64Vista x86XP2000NT 298/Me95Pharlap4Linux3OS X
NI AT-4350XXX7.4.4T7.4T7.1T6.9.3TXXX

Notes 

1. PCI, PXI, PCIe and PXIe - Devices listed by NI [Family Number] are available in both PCI and PXI Bus architectures. Devices listed with NI PXI- or NI PCI- before the number are available in that specific Bus architecture only. For Example, the Counter/Timers listing for the NI PCI-6601, NI 6602, NI 6608 indicates the NI 6601 is only available for the PCI Bus but the NI 6602 and NI 6608 are available for both the PCI and PXI Bus architectures.  PXIe and PCIe devices are always listed separately.

2. NI-DAQ 6.9.3 or Earlier requires NT Service Pack 4 or greater. NI-DAQ 7.x (Traditional and mx) requires NT Service Pack 6 or greater.

3. For information on supported Linux distributions, visit /linux/support.htm#1 or see the driver readme file.

4. The host system must also support the version of NI-DAQ listed. NI-DAQmx for LabVIEW RT is only supported on Pharlap RT Systems with LabVIEW RT installed.

 

Was this information helpful?

Yes

No