Filtered Results

Click Add Signals on the CAN port you want to configure. Select the Database that contains the signals you want to update. Select the Cluster that contains the signals you want to apply J1939 to. Select ...

Although it is possible (and supported) in principle to run a network without a database, using a database is highly recommended to have a consistent set of network parameters for all nodes in the network. ...

Configure the Logging Specification with the desired settings for your data log file name, location, and duration. Click the Start Logging and Stop Logging buttons at the top of any of the documents to ...

Ensure you are using supported hardware with your project. Refer to the following topics to connect or simulate devices. Discovering your CompactDAQ Device Discovering Your CAN Device Simulating DAQ Hardware ...

To begin interacting with your measurement system and creating logging configurations, create a new project in one of the following ways: Create a New Project from the launcher. Select FileNewProject from ...

You must set up the necessary sensors in your measurement system to log data. Configure the logging specification to for your log files. View data from your acquisition.

You must have devices added and configured for your FlexLogger project in order to visualize data from your sensor signals. Refer to the Configuring Your Hardware topic for more information. On the screen, ...

Record any sensor or channel information. Open the channel configuration dialog by clicking the configuration icon that corresponds to the channel. Click the edit icon on the General InfoSensor Properties ...

Complete the following steps to apply scaling to your configured sensor. Click the configure button on the channel of the device you wish to scale. The channel configuration dialog opens. In the Scaling ...

If you are having trouble finding your hardware in the FlexLogger Channel Specification, try the following tips. Refer to the list of supported hardware to confirm that your devices are supported in FlexLogger. ...

Viewing Your Data with DIAdem On the Data tab, double-click the log file to view it in a DIAdem-based viewer for FlexLogger. Viewing Your Data in Excel On the Data tab, right-click the log file and select ...

You must have devices added and configured for your FlexLogger project in order to visualize data from your sensor signals. Refer to the Configuring Your Hardware topic for more information. Map your signals ...

You use CAN interfaces to communicate between your hardware and a CAN database. Why does a user use CAN interfaces? I feel like that's an important addition here. Otherwise, this would work better as a ...

PXI/PCI CAN one and two-port devices and Transceiver Cables include two LEDs per port to help you monitor hardware and bus status. LED 1 primarily indicates whether the hardware is currently in use. LED ...

Set up a CAN database and determine which signals to use in your channel specification. Add signals to the Channel Specification.

Configure signals to use in your channel specification. Configure sampling rates to adjust the rate your device acquires samples.

Click the configure button for the desired channel to open the channel configuration dialog. Set the configuration options to the desired settings for the corresponding sensor connected to the channel. ...

Refer to the following information to configure your device and the signals it receives. Configure a CompactDAQ Device Configure a CAN Module Configure a Calculated Channel After you configure your hardware, ...

FlexLogger automatically discovers any installed hardware and displays it in the Channel Specification. CAN devices will display all available ports as CAN , where n is the number (starting from 1) ...

FlexLogger automatically discovers any installed hardware and displays it in the Channel Specification. Available device channels will be listed beneath the module information. CompactDAQ modules will ...

Go to FileManage CAN databases. Use the dialog that appears to add, remove, or rename your available databases. Double-click any database to launch the NI-XNET Database Editor. The NI-XNET Database Editor ...

Add a Calculated Channel to analyze or scale data from existing hardware channels. A Calculated Channel produces a new value based on calculations performed on other channels in the system. In the Channel ...

Click the Add Signals button on the CAN port that you wish to configure. Using the Database drop-down menu, select CAN database file that contains your signal definitions. Using the Cluster drop-down menu, ...

Select the Configure Sample Rates / Intervals from the toolbar, or click configure from the Sample Rates / Intervals dialog. Specify each frequency in Hz or s (seconds) for the desired slow, medium, and ...

Adjust any necessary General Charts Properties: Click anywhere on the chart, and use the Item tab on the right of the screen to customize your chart settings. Use the Item tab on the right of the screen ...

Right-click Devices and Interfaces and select Create New. A dialog box prompts you to select a device to add. Select Simulated NI-DAQmx Device or Modular Instrument and click Finish. In the Choose Device ...

Only C Series Sound and Vibration modules support High-Speed/IEPE feature. Refer to the Supported Hardware topic for more information on supported C Series modules. Refer to ni.com/info and enter the Info ...

You can use supported hardware in FlexLogger without a network connection. NI Product Model Name Notes CompactDAQ Chassis cDAQ-9171 — cDAQ-9174 — cDAQ-9178 — cDAQ-9179 — cDAQ-9181 — cDAQ-9184 — cDAQ-9185 ...

Showing 1-28 of 28 results