Filtered Results

You can use metadata as placeholders when you configure your log file name and location. Refer to the Using Test Metadata as Placeholders for Log File Names and Locations topic for more information. In ...

On the Data tab, right-click the log file and select Export. In the Export to CSV file format dialog, specify the desired File location to save your file, if necessary. The default is the same location ...

You must have channels added and configured for your FlexLogger project in order to visualize data from your sensor signals. Refer to the Configuring Device Channels topic for more information. On the ...

While the test is running, click the Add Note button in the toolbar. A dialog will open, timestamped with the time the button was clicked. Record any information you wish to include in the log file. Note ...

Open or create a FlexLogger Project. Find the hardware devices in your system. Configure Device Channels for data acquisition or signal generation.

Click Add Signals on the CAN port you want to configure. Select the Database that contains the signals you want to update. Select the Cluster that contains the signals you want to apply J1939 to. Select ...

FlexLogger supports both hardware and software filters for use in your project. Hardware filters offer a variety of filter type options to provide anti-aliasing and noise reduction with no CPU usage or ...

In your Channel Specification document, select all configured channels you wish to calibrate. In your Channel Specification document toolbar, click the Calibrate channels button . Select one of the following ...

Hover over the channel row to see the Configure gear . Click the gear for the channel you wish to add a strain gage to. Select the desired Bridge Configuration. Specify the Bridge Resistance (if available), ...

Configure the Logging Specification with the desired settings for your data log file name, location, duration, export, test properties, and triggering options. You can add metadata to a project and use ...

Use these methods to set the history length for graphs that support hold and pan viewing control. Set the Default History Length Go to File Preferences and specify the history length for your graph type ...

Select one of the following options depending on your automotive network: Use CAN databases—Manage and configure CAN databases to determine which signals to use in your Channel Specification. Use LIN databases—Manage ...

A calculated channel produces a new value based on calculations performed on other channels in the system. You can choose from the following calculation types: Configuring RMS and Mean Channels Configuring ...

Add counters to a project by configuring signals in the Channel Specification. Use these steps to configure counters for counter modules, such as the NI 9361, and onboard counters by enabling the line ...

Select one or more channels you wish to configure. Hover over a channel row and click the Configure gear . The configure gear appears when selecting multiple channels of the same data type (analog, digital, ...

Add a channel produced by applying either a lowpass or a highpass Butterworth filter to an existing hardware channel. The lowpass or highpass filter channel displays filtered data that excludes any noise ...

Synchronization-enabled devices use the IEEE 802.1AS protocol over the network and cannot synchronize with devices that use other protocols or IEEE 1588 profiles or vice versa. Ensure that your system ...

Add and configure signals to use in your Channel specification. Use any of the following options that apply to the devices in your system: Configure sensors in your Channel Specification Configure digital ...

NI recommends the read rate of 1 Hz for data using SystemLink tags. For channels that require a faster read data rate, consider using the FlexLogger Plugin Development Kit to create a custom LabVIEW plugin ...

Select one or more channels you wish to configure. Hover over a channel row to see the Configure gear . Click the gear for the channel or channels you wish to configure. The configure gear appears when ...

Showing 1-20 of 72 results
1 of 4 pages