The LabVIEW SoftMotion Module 2017 f1 Patch is available for the LabVIEW 2017 SoftMotion Module. National Instruments recommends this patch for all LabVIEW 2017 SoftMotion Module installations.
This patch will also be available via Update Service. If you already have LabVIEW 2017 SoftMotion Module installed, Update Service will update your computer with the LabVIEW SoftMotion Module 2017 f1 Patch. If you have not yet installed LabVIEW 2017 SoftMotion Module, Update Service will update your computer with LabVIEW SoftMotion Module 2017 f1, which is a full installer that includes both LabVIEW 2017 SoftMotion Module and the f1 patch.
The patch fixes the issues listed in the tables below.
Issues Fixed in the LabVIEW SoftMotion Module 2017 f1 Patch
||SDI Axis position cannot be reset following a home move
||SoftMotion Set Plugin Mode will not properly close the SDI plug-in if an error is input
||LabVIEW RT crash when continuously calling property nodes on different resources in parallel
||Several SoftMotion examples in NI Example Finder have broken links