Introduction to the PXIe-5842 Third Generation PXI Vector Signal Transceiver



NI introduced the concept of a Vector Signal Transceiver (VST) in 2012. A VST combines an RF signal generator, an RF signal analyzer, and a powerful FPGA onto a single PXI module. The PXIe-5842 VST is the first VST to offer a continuous frequency coverage from 50 MHz all the way up to 23 GHz. It doubles the available instantaneous bandwidth from previous models to 2 GHz and provides overall RF performance improvements on key metrics like error vector magnitude (EVM) and average noise density.

Specification PXIe-5842 Performance
Frequency Range 50 MHz to 23 GHz
Bandwidth Up to 2 GHz
Tx/Rx Amp. Accuracy ± 0.4 dB typ.
Tx/Rx Flatness ± 0.45 dB typ. (2 GHz BW)
EVM (5G NR) <-54 dB (100 MHz, loopback, measured)
EVM (802.11be)  <-49 dB (320 MHz, loopback, measured)
Maximum Output Power <+20 dBm typ. (CW @ 5 GHz)
Tuning Time <230 µs
PXI Express Slots 4


Table 1: PXIe-5842 Specifications

Figure 1: The PXIe-5842 Third Generation PXI Vector Signal Transceiver

As a result, VSTs serve a wide range of RF design and test applications and are ideally suited for applications that require an RF stimulus and RF response. Example applications include wireless production test, RFIC characterization, channel sounding, radar prototyping, signal intelligence, and software-defined radio.

​Key PXIe-5842 VST Features

The PXIe-5842 features a high-performance RF signal generator and RF signal analyzer. Both instruments use direct conversion from IQ to RF and are optimized for excellent measurement quality. 

Key technical features:

  • Wide frequency range

  • Wide instantaneous bandwidth 

  • Optimized RF front end

  • High-Performance Local Oscillator (LO)

  • Modular architecture


Wide Frequency Range

The PXIe-5842 is the first VST to offer continuous frequency coverage from 50 MHz to 23 GHz in one instrument. Applications and standards ranging from WLAN, Ultra-Wideband (UWB), Bluetooth, 5G NR, and radio prototyping can now all be tested with one capable and versatile instrument. The combination of the cutting-edge dual synthesizer (PXIe-5655) with the high-frequency coverage means you can use the PXIe-5842 for various aerospace and defense applications (A/D/G) from the VHF to K bands. Applications include radar target simulation, spectrum monitoring in electronic warfare and satellite communications, or for parametric test of ESAs (Electronically Scanned Arrays) components commonly used in radar and satellite communication systems.

Figure 2: Commercial Applications Spanning the RF Spectrum and SATCOM Proliferation

Wide Instantaneous Bandwidth

Wireless standards today like Wi-Fi or 5G NR use significantly wider bandwidth channels to achieve higher peak data rates. The latest 802.11be Wi-Fi standard defines a maximum channel bandwidth of 320 MHz. The 5G NR standard defines a maximum channel bandwidth of 400 MHz in the FR1. These standards will continue to evolve with more channel bandwidth support over the years to come.

In addition, the bandwidth requirements of the instrument often exceed the bandwidth of the wireless communications channel. For example, when testing RF power amplifiers (PAs) under digital predistortion (DPD) conditions, the test equipment itself must extract a PA model, correct for nonlinear behavior, and then generate a corrected waveform. Advanced DPD algorithms often require three to five times the RF signal bandwidth. As a result, instrument bandwidth requirements can be up to 2 GHz for 5G NR FR1 (400 MHz signal) and 1.6 GHz for 802.11be (320 MHz signal).

Figure 3: DPD Algorithm Using 5X Signal Bandwidth

A significant enhancement of the PXIe-5842 VST is its wider instantaneous bandwidth of 2 GHz. This wider bandwidth means that engineers can solve more challenging applications. For example, in tests for 5G NR devices, many of the 5G carriers are separated by several hundred megahertz. With the wide bandwidth of the PXIe-5842, engineers can use a single instrument to generate or analyze multiple 5G NR carriers instead of using multiple instruments.

Increasing Channel Bandwidth
Cellular Wi-Fi ADG
LTE-Advanced 100 MHz Wi-Fi 6 80 MHz SatCom
5G NR FR1 400 MHz Wi-Fi 6 160 MHz Radar
5G NR FR2 2000 MHz Wi-Fi 7 320 MHz EW
3x Bandwidth for Adjacent Channel Power | 5x Bandwidth for Digital Pre-Distortion


Table 2: Evolution of Channel Bandwidth for Wireless Standards

In addition, wideband radar systems often require up to 2 GHz of signal bandwidth to accurately capture pulsed signals. Also, in spectrum monitoring systems, the bandwidth of the instrument can dramatically improve the scan rate. Finally, wide signal bandwidth is an essential requirement for many advanced research applications.

Optimized RF Front End

The PXIe-5842 design has three distinct receiver/transmitter baseband paths that optimize the RF front end for best performance under each test condition:

  1. Direct RF sampling path for center frequencies below 1.75 GHz. This path allows for a simpler RF chain, resulting in generation and acquisition without impairments like LO leakage and residual sideband image.

  2. Low IF baseband path optimized for high dynamic range for signals with instantaneous bandwidth (IBW) up to 900 MHz. On this path, the signal generator and the signal analyzer offsets the LO to a frequency out of band allowing for improved frequency response and better average noise density by 3 dBm/Hz.

  3. Zero IF baseband path, which is optimized for wide bandwidth signals with an IBW up to 2 GHz. 


Figure 4: PXIe-5842 Vector Signal Transceiver (VST) Simplified Block Diagram

High-Performance LO

The PXIe-5842 VST is comprised of the PXIe-5842 module and the high-performance dual LO synthesizer, the PXIe-5655, which has an excellent phase noise performance.

Figure 5: PXIe-5842 VST Measured RF Input Phase Noise

The next-generation wireless devices have even more stringent EVM performance requirements. With higher order modulation schemes and wideband multicarrier signal configurations, the RF front ends of today’s wireless devices require better linearity and phase noise to deliver the required modulation performance. Consequently, test instrumentation for wireless device test must deliver even more accurate RF performance. The PXIe-5842 VST uses advanced, patented I/Q calibration techniques to deliver best-in-class EVM performance for wideband signals. For example, for an 802.11be, 320 MHz, 4096-QAM, 12 dB PAPR waveform, the PXIe-5842 achieves -49 dB EVM. This performance can be further improved using NI’s patented cross-correlation technique, available through our RFIC Test Software.

Figure 6: 802.11be Device Under Test with PXIe-5842 and RFIC Test Software

Good phase noise is one of the most critical factors in a modern radar system. Radar systems operate by transmitting a pulse at one frequency and then measuring the frequency shift of the returned pulse, as the shift is related to the velocity of the object being imaged through the Doppler effect. Poor phase noise performance degrades the ability to process the Doppler information. The PXIe-5842 has typical phase noise performance of -80 dBc/Hz at 18 GHz and 100 Hz offset making it a great candidate for radar target generation and analysis.

With a typical LO tuning time below 230 µs, the PXIe-5842 can support applications that require low-latency frequency hopping common to the aerospace and defense industries.

Modular and Easily Synchronized

Modern communications standards use sophisticated multi-antenna technology. In these systems, multiple-input multiple-output (MIMO) configurations provide a combination of either higher data rates through more spatial streams or more robust communications through beamforming. Because of these MIMO benefits, next-generation wireless technologies, such as 802.11be or 5G NR, will use more complex MIMO schemes with up to 128 antennas on a single device.

Not surprisingly, MIMO technology adds significant design and test complexity. It not only increases the number of ports on a device, but also introduces multichannel synchronization requirements. To test a MIMO device, RF test equipment must be able to synchronize multiple RF signal generators and analyzers. In these configurations, the instrument’s form factor and the synchronization mechanism are critical.

Figure 7: Engineers can synchronize up to four PXIe-5842s in a single 18-slot PXI chassis.

With the compact footprint of the third generation VST, engineers can synchronize up to four VSTs in a single 18-slot PXI chassis. In addition, engineers can synchronize the VST in a completely phase-coherent manner. In hardware, each VST can import or export the LO so that all modules can share a common LO. In software, engineers can use NI’s patented NI-TClk technology to easily synchronize multiple instruments using the NI-TClk API. Using this API, engineers can synchronize multiple VSTs or even synchronize VSTs with other modular instruments, either in LabVIEW, C/C++, or .NET.

Figure 8: With the NI-TClk API, engineers can synchronize the VST with other PXI instruments.

PXI VST Software Tools

One of the most unique attributes of the VST is its highly scalable software architecture. The VST is designed with multiple software options that range from a getting-started experience with the soft front panel to a high-level programming API.

The simplest software option for the VST is the soft front panel experience. With the soft front panel, users can quickly and easily configure the RF signal generator or analyzer to debug fixtures and get fast measurement results. For example, in Figure 9, the soft front panel gives engineers the ability to configure the VST for an adjacent channel power (ACP) measurement.

Figure 9: Users can configure the VST for quick measurements using the RFmx soft front panels.

Figure 10: Channel Power Measurement in RFmx

The second software option uses NI RFmx, which provides an intuitive programming API that offers both ease of use and advanced measurement configuration. Engineers can get started with one of more than 100 example programs in C, .NET, and LabVIEW. These examples are designed to make instrument automation straightforward. For example, Figure 10 illustrates a channel power measurement using an RFmx LabVIEW example that uses only seven function calls.


PXI VST Applications

Radio Frequency Front-End (RFFE) Validation

Engineers working on RF front ends for wideband standards, like 5G and Wi-Fi 6, must validate new RF front-end devices over more frequency bands, carrier-aggregated scenarios, and increasingly complex modulation schemes. With markets demanding greater efficiency and linearity, engineers need to validate design performance with the latest digital predistortion (DPD) algorithms and tightly synchronized envelope tracking (ET) configurations in 50- and non-50 Ω environments.

NI’s RFFE Validation Reference Architecture performs all four key DPD operations: characterizing device behavior, model extraction, model inversion, and application of predistortion to baseband IQ samples. NI’s RFIC Test Software allows customers to apply DPD models and observe device behavior interactively. 

Envelope tracking (ET) for wideband power amplifiers relies on an ET Power Supply (ETPS) to vary the DC power supply dynamically in conjunction with the amplitude of a modulated wireless signal. Envelope tracking keeps a PA near compression as often as possible—thus improving overall efficiency. For ET testing, the NI RFFE Validation reference architecture transforms multiple instruments into an easy to configure, unified measurement experience that simplifies control and synchronization of the VST, a high-bandwidth arbitrary waveform generator (AWG), and high-speed digitizer.

Learn more about NI’s solutions for RFFE characterization.

Figure 11: Typical Configuration for PA Validation Testing Under DPD Conditions

RFFE Production Test

Customers can deploy PXI for manufacturing test of RFFE components either as a stand-alone system or as part of the NI Semiconductor Test System (STS). The STS combines the NI PXI platform with NI’s speed-optimized test software for high test throughput inside a fully enclosed test head suited for production environments.

Figure 12: Different RFFE Production Test Solutions

The STS enclosure houses all the key components of a production tester including test instruments, Device Under Test (DUT) interfacing, and device handler/prober docking mechanics. With the open, modular STS design, you can take advantage of the latest industry standard PXI modules for more instrumentation and computing power to lower the overall cost of RFFE production test.

Learn more about NI’s solutions for high volume RFFE production test.

Radar Target Generation for System Level Test

When subsystems are assembled into a fully functional radar system, engineers require a system-level test solution to ensure end-to-end functionality once all subsystems are integrated, including the radar processing software. Radar system-level test requires that a received target pulse be generated from a transmitted radar pulse in a realistic/real-time manner. This realistic and real-time requirement is difficult, as it implies low latency and determinism. Both of those requirements are challenging to achieve in digital systems when data buses and operating systems are inserted between the receive and transmit path of the test set. 

NI offers solutions built around the VST to engineers performing basic radar production and functional test. 

Figure 13: Basic Radar System Components

Electronically Scanned Array (ESA) Characterization

The electronically scanned array (ESA) in its various forms, including the passive electronically scanned array (PESA) and active electronically scanned array (AESA), is the bedrock of modern RF systems in radar and communication applications. With the move toward ESA technology, the number of electronic components in a radar system has exponentially increased over time. Whether for radar or satellite communications, developing an ESA is a multi-step process ranging from the design or selection of fundamental components, integration, and validation of these components into functional modules and sub-assemblies, and finally system level verification once integrated into the final array. Each stage consists of key modeling, characterization, and ultimately production test with the importance of correlation across the lifecycle being a key requirement.

NI provides both the hardware and software tools needed to test the elements of an ESA system. Learn more about NI’s solutions for radar validation and ESA characterization.


SATCOM Telemetry and Datalink Validation System

The recent commercialization of low Earth orbit (LEO) and medium Earth orbit (MEO) has led to an introduction of modern satellite-based applications like non-terrestrial networks (NTN) and high-resolution remote sensing and imagery. The satellite constellations, ground equipment, and supporting launch vehicles developed to support these new services come with new communication and data link technologies that, in turn, include new challenge in design, system validation, and production test.

NI offers a broad range of hardware and software validation solutions to assist customers in developing high-performance space communication systems. Learn more about NI’s solution for SATCOM telemetry and datalink validation systems.



The increased complexity of wireless technologies has created a demand for more capable and versatile RF instrumentation. The PXIe-5842 is the highest performing PXI VST available—and is the only PXI product that can be configured to test all modern wireless standards like Bluetooth, Wi-Fi, 5G NR, or UWB, as well as satellite communications. It provides a contiguous frequency coverage ranging from VHF to K radar bands. The combined increased instantaneous bandwidth to 2 GHz with the improved RF performance assures that PXIe-5842 will be able to address even the most difficult test and measurement challenges. PXIe-5842 shares the same common software tools with the previous generation VST, meaning customers will have a seamless upgrade experience and will be able to port their previous applications to the new PXIe-5842 quickly.