Main Page : DAQ Multifunction I/O Cable and Accessory Compatibility

Overview

This guide describes how to select an NI Data Acquisition (DAQ) cable or accessory that is compatible with your NI DAQ hardware. When working with NI Multifunction I/O (MIO) models such as 63xx, 62xx, 61xx, 60xxE, or 60xx, (formerly X Series, M Series, S Series, E Series, B Series respectively), NI 65xx Digital Input/Output (DIO), NI 67xx Analog Output (AO), or NI 66xx Counter/Timer (TIO) devices, there are many choices or decisions available. This guide recommends a variety of options whether you're looking for high performance, low noise, low cost, or a custom solution for your cable, terminal block, or connector block.

Contents

Using this DAQ Cable and Accessory Guide

This guide is intended to cover compatibility between NI DAQ devices and modules, and their cables and accessories.

 

Depth and Coverage of the DAQ Cable and Accessory Compatibility Guides

While these guides cover a broad range of configurations, to stay concise, they are not intended to cover every potential combination or use case. The most common and recommended solutions are presented. Configurations with known limitations are noted.

These guides are intended to cover current, legacy, and recently obsoleted NI DAQ hardware devices, and their cable and accessory options. They do not cover long-time end of life (EOL) NI DAQ products, and do not cover EOL cable or accessory options. The guide is not intended to cover cable or accessory options for other NI hardware families such as RF, CompactDAQ, Digital Waveform Instruments (formerly HSDIO), Digital Pattern Instruments, NI High-Speed Serial Instruments, C Series, Source Measurement Units (SMUs), or reconfigurable I/O (formerly R Series).

Some cables or accessories from other NI product families may share the same connector or visually appear the same, but typically come with limitations, incompatibilities, or safety concerns. For this reason, unless expressly mentioned in this guide, compatibility with other NI cables and accessories is not covered in this guide and is not recommended.

 

Finding Your Device or Module Model

These pages are arranged by first having you identify your hardware model and then choose the accessory or cable combination that best fits your needs. You will first need to select the correct guide for your product's family, using the Find Your DAQ Cable and Accessory Compatibility Guide section. After you have opened the page for your product family, follow the directions to identify which cables, terminal blocks, or connector blocks will meet your needs.

To start, your module or device's model number can be found on the physical device or in software.


How to locate your model number on the physical device:

If your device is already installed it may be easier to locate the model number in software, below.

  • PCI and PCI Express (PCIe) devices: Model numbers are typically found on the faceplate of the card near the connector. Click here for an example. Some models also have the product family printed on the shielding of the card.
  • PXI and PXI Express (PXIe) modules: Model numbers are typically found at the top of the faceplate of the card. Click here for an example. Some models also have the product family printed on the shielding of the card. Click here for an example.
  • USB devices: Model numbers can be found on the enclosure.

 

How to locate your model number in software:

If you've already installed NI Measurement & Automation Explorer (MAX) and NI-DAQmx, complete the following steps.

  1. Open NI Measurement & Automation Explorer (NI MAX).
  2. Select My System»Devices and Interfaces .
    • PCI, PCI Express (PCIe), and USB devices are listed as NI PCI-,NI PCIe- or NI USB- followed by the model number.
    • PXI and PXI Express (PXIe) modules are listed under their chassis, which you will have to click to expand. Modules are listed as NI PXI- or NI PXIe- followed by the model number.

 

Find Your DAQ Cable and Accessory Compatibility Guide

Multifunction I/O (63xx Models) Cable and Accessory Compatibility Guide

Formerly referred to as X Series, these devices and modules model numbers start with 63xx, and have PCI Express (PCIe), PXI Express (PXIe), and USB connectivity.

This table contains NI 63xx model numbers, which can come in any of the connectivity options listed.
6320634163516361637463866396
63216343635363636375  
63236345635563656376  
 6346635663666378  
 634963586368   

 

Multifunction I/O (62xx Models) Cable and Accessory Compatibility Guide

Formerly referred to as M Series, these devices and modules model numbers start with 62xx, and have PCI, PCI Express (PCIe), PXI, PXI Express (PXIe), and USB connectivity.

This table contains NI 62xx model numbers, which can come in any of the connectivity options listed.
62106220623062506280
62116221623262516281
62126224623362546284
62156225623662556289
6216622962386259 
6218 6239  

 

Simultaneous Sampling Multifunction I/O (61xx Models) Cable and Accessory Compatibility Guide

Formerly referred to as S Series, these devices and modules model numbers start with 61xx and have PCI, PXI, and PXI Express (PXIe) connectivity.

This table contains NI 61xx model numbers, which can come in any of the connectivity options listed.
61106120613261436154
611161226133  
61156123   
 6124   

 

Legacy Multifunction I/O (60xx/60xxE Models) Cable and Accessory Compatibility Guide

Formerly referred to as B Series or E Series, these devices and modules model numbers start with 60xx, and have PCI, PXI, and PCMCIA (DAQCard) connectivity.

This table contains NI 60xx/60xxE model numbers, which can come in any of the connectivity options listed.
60106023 (6023E)6030 (6030E)6040 (6040E)PCI-MIO-16XE-50
6011 (6011E)6024 (6024E)6031 (6031E)6052 (6052E)PCI-MIO-16XE-10
60136025 (6025E)6032 (6032E)6062 (6062E)PCI-MIO-16E-4
6014 6033 (6033E)6070 (6070E)PCI-MIO-16E-1
  6034 (6034E)6071 (6071E) 
  6035 (6035E)  
  6036 (6036E)  

 

Digital I/O (65xx Models) Cable and Accessory Compatibility Guide

Formerly referred to as DIO, these devices and modules model numbers start with 65xx and have PCI, PCI Express (PCIe), PXI, and USB connectivity.  Check out Digital Instrument Cable and Accessory Compatibility for coverage of other NI 65xx models.

This table contains NI 65xx model numbers, which can come in any of the connectivity options listed.
650165106520PCI-DIO-96
650365116521 
650865126525 
650965136528 
 65146529 
 6515  
 6516  
 6517  
 6518  
 6519  

 

Counter/Timer (66xx Models) Cable and Accessory Compatibility Guide

Formerly referred to as Timing I/O (TIO), these devices and modules model numbers start with 66xx and have PCI, PCI Express (PCIe), PXI, and PXI Express (PXIe) connectivity.

This table contains NI 66xx model numbers, which can come in any of the connectivity options listed.
660166126624
66026614 
6608  

 

Analog Output (67xx Models) Cable and Accessory Compatibility Guide

Formerly referred to as AO Series, these devices and modules model numbers start with 67xx and have PCI, PXI, PXI Express (PXIe), and PCMCIA connectivity.

This table contains NI 67xx model numbers, which can come in any of the connectivity options listed.
6703671167226731
6704671367236733
 6715 6738
   6739

 

 

Was this information helpful?

Yes

No