Archived: NI System Driver Set April 2015

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Contents

The NI System Driver Set April 2015 provides the latest version of NI drivers as of the release on April 12, 2015. NI LabVIEW 2014 SP1 is the latest version of the graphical development software supported by this driver set. This driver set adds support for the following hardware: 

  • PXIe-2524
  • PXIe-2525
  • PXIe-2526
  • PXIe-2737
  • PXIe-2738
  • PXIe-2739
  • PXIe-2746
  • PXIe-2747
  • PXIe-2748
  • PXIe-4463
  • PXIe-5654
  • PXIe-5696
  • cDAQ-9133
  • cDAQ-9135
  • NI 9860
  • NI 9209
  • NI 9230
  • NI 9216
  • NI 9226
  • NI 9246
  • NI 9247
  • NI 9344
  • NI 9361

 

Contents

The following drivers are included in the April 2015 System Driver Set:

  • Data Acquisition
    • NI-DAQmx 14.5*
    • Traditional NI-DAQ 7.4.4
  • Instrument Control
    • NI-488.2 14.0
    • NI-VISA 14.0.1
    • NI-Serial 14.0
    • IVI Compliance Package 14.0
    • PXI Platform Services 14.1*
    • NI-PXImc 14.0
    • NI-VXI 3.9
  • Modular Instruments
    • NI-Switch 15.1*
    • NI-DMM 14.0
    • NI-Scope 14.1
    • NI-RFSA 14.5*
    • NI-FGEN 14.0.1
    • NI-DCPower 14.1.2*
    • NI-RFSG 14.5*
    • NI-HSDIO 14.0
    • NI-5690 1.1
    • NI-5640R 1.7
    • NI-OSI 2.1
    • NI-VNA 14.0
    • NI-HWS 14.0
  • Timing and Synchronization
    • NI-Sync 14.5
    • NI-TimeSync 14.5
    • NI-1588 Configuration 14.0
  • Reconfigurable IO
    • CompactRIO 14.5
    • R Series 14.5
    • NI-FlexRIO 14.5
      • FlexRIO Adapter Module Support 14.2*
  • Motion
    • NI-Motion 14.0
  • Vision
    • NI-IMAQ 14.5
    • NI-IMAQdx 14.5
    • NI IMAQ I/O 14.5
  • Distributed I/O
    • NI-FieldPoint 14.5
    • NI-WSN 1.5.0
  • Real-Time and Embedded
    • NI-488.2 14.0
    • NI-Serial 14.0
    • NI-Watchdog 14.1
  • Communication Buses and Protocols
    • NI-XNET 14.5
    •  NI-CAN 14.0
    • NI-IndCom for CANopen 14.5*
    • NI-IndCom for DeviceNet 14.5*
    • NI-IndCom for EtherCat 14.5*
  • Configuration and Utilities
    • NI I/O Trace 14.5
    • NI Measurement & Automation Explorer 14.5
    • NI System Configuration 14.5
    • NI Network Browser 5.5

*Update from NI System Driver Set February 2015.

 

Download

To download the April 2015 driver set run the downloader attached to this document. Note that this download is larger than 4 GB. Please follow the instructions in KnowledgeBase 5JHC2SDX for downloading this file. 

 

Was this information helpful?

Yes

No