Filtered Results

You can enter debug mode from the Home screen by selecting Debug. Using this method, InstrumentStudio searches for open device driver sessions and then creates a layout based on the devices it discovers. ...

Each panel in InstrumentStudio has its own instrument header menu, which you can access by clicking the instrument header menu icon () in the upper-right corner of the panel. Within the instrument header ...

After enabling at least one FFT channel and markers, you can use the peak search functions to locate peaks. Peaks are the samples for which the amplitude rises and falls around a threshold. You can move ...

Creating a Layout Automatically When you create a layout automatically, InstrumentStudio detects devices you have installed and creates panels using those devices. Complete the following steps to create ...

Complete the following steps to disable debugging for a device: Open the Configure Debug Session window by selecting Configure debug session from the instrument header menu. Deselect the Debug Enabled ...

Add a waveform generator device to the large panel. Select a waveform mode from the drop-down menu in the upper-right corner of the large panel. Standard waveform—Generates a waveform using the channel ...

If InstrumentStudio is closed and a device used in an InstrumentStudio project goes offline or has its name changed, InstrumentStudio flags that device as missing the next time you open the project. The ...

Adjust data capture preferences by selecting FilePreferences and navigating to the Capture data tab. In this tab, you can set the destination directory and change the filename and format for both images ...

Complete the following steps to debug a C, C++, or .NET application using InstrumentStudio. Supporting communication with a device in C, C++, or .NET environments at breakpoints requires additional overhead ...

You must enter debug mode to access the Monitor and Control buttons. Refer to Entering Debug Mode for more information. Complete the following steps to monitor and/or control a device in InstrumentStudio ...

Showing 1-10 of 27 results
1 of 3 pages