These specifications apply to the PXI-6541 with 1 MBit, 8 MBit, and 64 MBit of memory per channel.

This document lists specifications for the PXI-8517 2-port Flexray interface module . Definitions Warranted specifications describe the performance of a model under stated operating conditions and are ...

This document lists specifications for the PXI-2797 terminated multiplexer module . All specifications are subject to change without notice. Visit ni.com/manuals for the most current specifications. About ...

Launch LabVIEW. Select Help » Find Examples . Open the example VI that you want to use by selecting Hardware Input and Output » Modular Instruments » NI-SCOPE (High-Speed Digitizers) . Tip If you are not ...

Connect CH 0 to an input signal. Launch the NI-SCOPE SFP from the Start menu. In the Select Device dialog box, select the device name assigned to the device in MAX. Click Auto to adjust the acquisition ...

You can make a measurement interactively using the NI-SCOPE SFP or programmatically using LabVIEW. Parent topic: Oscilloscopes GSG Purpose

Restart the system. Launch MAX, and perform the self-test again. Power off the chassis. Reinstall the failed module in a different slot. Power on the chassis. Perform the self-test again. Parent topic: ...

Connect CH 0 to an input signal. Launch the NI-SCOPE SFP from the Start menu. In the Select Device dialog box, select the device name assigned to the device in MAX. Click Auto to adjust the acquisition ...

You can make a measurement interactively using the NI-SCOPE SFP or programmatically using LabVIEW. Parent topic: Oscilloscopes GSG Purpose

Note Before you begin, install and configure your chassis and controller. This document explains how to install, configure, and test the PXI/PCI-5152 . The PXI/PCI-5152 high-speed oscilloscope features ...

Examples demonstrate the functionality of the device and serve as programming models and building blocks for your own applications.

Note Before you begin, install and configure your chassis and controller. This document explains how to install, configure, and test the PXI/PCI-5124 . The PXI/PCI-5124 high-speed oscilloscope features ...

Operating Environment Ambient temperature range 0 °C to 55 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2 .) Relative humidity range 10% to 90%, noncondensing (Tested in accordance with ...

Operating Environment Ambient temperature range 0 °C to 45 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2 .) Relative humidity range 10% to 90%, noncondensing (Tested in accordance with ...

You can acquire data interactively using the NI-SCOPE SFP , or you can use the NI-SCOPE instrument driver to program your device in the supported ADE of your choice. Table 3. PXI/PCI-5152 Programming Options ...

Ensure that the environment in which you are using the PXI/PCI-5124 meets the following specifications.

You can acquire data interactively using the NI-SCOPE SFP , or you can use the NI-SCOPE instrument driver to program your device in the supported ADE of your choice. Table 3. PXI/PCI-5124 Programming Options ...

The NI website is your complete resource for technical support. At ni.com/support , you have access to everything from troubleshooting and application development self-help resources to email and phone ...

To use the PXI/PCI-5152 , your system must meet certain requirements. For more information about minimum system requirements, recommended system, and supported application development environments (ADEs), ...

If you receive an over-temperature or thermal shutdown error and your device shuts down, complete the following steps to re-enable your device: Power off the computer or chassis that contains the device. ...