Install one or more AIO-3681/3682 modules to enable analog-to-digital and digital-to-analog conversion of RF signals.

Install one or more AIO-3691 modules to enable high-speed serial connectivity between each FPGA and the ATCA-3671.

Notice Install the RTM before installing the ATCA-3671 . Installing the ATCA-3671 before installing the RTM can damage the connectors of both modules. Ensure that the module ejector handles are in the ...

Note You must use an RTM-3661 module with the ATCA-3671 module for host access to the FPGAs from LabVIEW. Direct host access is not supported for other RTMs. Connect one end of a Gen3 MXI cable to the ...

Notice Install the RTM before installing the ATCA-3671 . Installing the ATCA-3671 before installing the RTM can damage the connectors of both modules. Gently guide the module into the chassis module guides ...

Note If you are using BPS, visit ni.com/info and enter the Info Code BPSsupport to access BPS-related resources within the BPS Support Community. Install an ADE, such as LabVIEW. If you chose to install ...

Note Power requirements are dependent on the adapter modules installed and the contents of the FPGA application. Power supply -48 V Current 9 A Parent topic: Powering On the ATCA-3671 Module

Refer to the following figure for information about other product tasks and associated resources for those tasks. EXPLORE LEARN CREATE DISCOVER Located online at n i . c o m / manuals the application development ...

In addition to the required items, you may choose to provide one or more of the following ATCA I/O modules.

In addition to the kit contents, you must provide the following additional items: Single-Module ATCA Chassis [1] Note If your kit does not include a chassis, you can purchase one from ni.com or by contacting ...

This document describes how to install, configure, and test the ATCA-3671 FPGA Module for ATCA. The ATCA-3671 is programmable both through LabVIEW using LabVIEW FPGA and through BEEcube Platform Studio ...

Ensure that the environment you are using the ATCA-3671 in meets the following specifications.

Disconnect all cables from the ATCA-3671 module. Loosen the four captive screws on the front panel of the ATCA-3671 module. Push up on the latch and rotate the ejector handle away from the module to unseat ...

Disconnect all cables from the RTM. Loosen the four captive screws on the back panel of the RTM. Use the ejector handles to unseat the RTM from the chassis. Carefully remove the RTM from the chassis. Use ...

Showing 21-40 of 282147 results
2 of 14108 pages