This product meets the essential requirements of applicable European Directives, as follows: 2014/35/EU; Low-Voltage Directive (safety) 2014/30/EU; Electromagnetic Compatibility Directive (EMC) 94/9/EC; ...

5 40 e 中国RoHS — NI符合中国电子信息产品中限制使用某些有害物质指令(RoHS)。关于NI中国RoHS合规性信息,请登录 ni.com/environment/rohs_china 。(For information about China RoHS compliance, go to ni.com/environment/rohs_china .) Parent topic: Environmental ...

This product meets the requirements of the following EMC standards for electrical equipment for measurement, control, and laboratory use: EN 61326 (IEC 61326): Class A emissions; Basic immunity EN 55011 ...

NI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial to the environment ...

Refer to the manual for the chassis you are using for more information about meeting these specifications. Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C Storage temperature (IEC ...

U.S. (UL) Class I, Division 2, Groups A, B, C, D, T4 ; Class I, Zone 2 , AEx nA IIC T4 Gc Canada (C-UL) Class I, Division 2, Groups A, B, C, D, T4 ; Class I, Zone 2

Dimensions Visit ni.com/dimensions and search by module number. Weight Approx. 153 g (5.4 oz) Parent topic: Specifications

Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for NI products, visit ni.com/product-certifications ...

This product is designed to meet the requirements of the following electrical equipment safety standards for measurement, control, and laboratory use: IEC 61010-1, EN 61010-1 UL 61010-1, CSA 61010-1 EN ...

To meet these specifications, you must panel mount the system. Operating vibration Random (IEC 60068-2-64) 5 g rms , 10 Hz to 500 Hz Sinusoidal (IEC 60068-2-6) 5 g, 10 Hz to 500 Hz Operating shock (IEC ...

Power consumption from chassis Active mode 0.5 W max Sleep mode 50 µW max Thermal dissipation (at 70 °C) Active mode 1.5 W max Sleep mode 55 W max Required external supply voltage range (V SUP ) +8 to ...

Maximum Voltage Note The maximum voltage that can be applied or output without creating a safety hazard. Connect only the voltages that are within these limits. RS485/RS422 Port-to-COM -8 to +13 VDC max, ...

KLUv/QBYLBsELnTElgktwBRtIgZ0zzIehJ4whiSBTuS/+pqYWyJCXm44nsRFpChlen2mcJMgCMCX ogAEVwxoCGgIPWhqYidFPSyfJ3c36Q+diali/XubfzbKq4dVmrwMI6kfztKcYEq6KM7jEk2OdoJ4 kCUlVZyEKZdH2S5k31LoxzFPBj9neLy5zPQwmQVdk+CP35bDtBreqEpoeuDRUskgm/gH2kfGV5PM ...

Connect only voltages that are within the following limits: Maximum voltage, from any pin to any pin on a single connector [1] ±30 V Isolation Channel-to-channel, channel-to-Vsup inputs (up to 5,000 m ...

Caution To ensure the specified EMC performance, operate this product only with shielded cables and accessories connected to the CH 0 and CH 1 ports. Do not use unshielded cables or accessories unless ...

The ground terminals on a measurement adapter are connected to chassis ground when the measurement adapter is connected to the NI 9218 and the NI 9218 is installed in a chassis.

The NI 9218 provides built-in support for the following measurement types. ±16 V ±65 mV Full-Bridge IEPE Tip NI recommends using the NI 9982 screw-terminal adapter when using built-in measurement types ...

Skip to Content 북마크 팔로우 목록 검색 기본 설정 로그인 NI-9218 Getting Started 2-Channel, 24-Bit, Dynamic Universal Module Where to Go Next 태그: 시작하기 NI-9218 class="topictitle1" id="GUID-C8D0E92E-6BF9-4AED-A9F8-F4579C8EA4DB__GUID-8EF3BE11-BE08-4804-8FEF-30C78F6EA689">Where ...

Complete the following steps to use a USB cable to connect the NI ELVIS III from the USB device port to your host computer.

The NI ELVIS III Software Bundle includes the main software you need to build embedded applications for the NI ELVIS III, including LabVIEW, the LabVIEW Real-Time Module, the LabVIEW ELVIS III Toolkit, ...

ADC Channel MUX Application Board Connector Conditioning Circuit Bank A Mode Select Bank A Channel Select Bank A AI<0:7> Mode Selector (DIFF or RSE) Gain Selector Bank A Gain Select AGND FPGA ADC Channel ...

DAC BUFFER A/AO1 DAC BUFFER B/AO0 DAC BUFFER B/AO1 DAC BUFFER Application Board Connector FPGA Bank A AO0 Data Bank B AO1 Data Bank B AO0 Data Bank A AO1 Data Bank B Bank A The NI ELVIS III provides

The NI ELVIS III oscilloscope is compatible with attenuating probes. These are useful for measuring high bandwidth signals because the series resistor isolates the cable capacitance of the probe and the ...

In this part of the tutorial, you start from a project that monitors the user programmable button on the NI ELVIS III, and extend its functionality to control the user programmable LEDs.

If you are a Lab Administrator, you can prevent unauthorized users from changing system configuration on the NI ELVIS III by setting an administrator password and permissions in MAX.

This section provides step-by-step instructions on how to connect and set up the NI ELVIS III workstation.

Power Converter Positive VPS Negative VPS Protection Circuit Protection Circuit IO Connector 14-bit DAC Voltage Setpoint Control Logic VPS 14-bit DAC Current Limit Setting Power Converter 14-bit DAC Voltage ...

The user programmable button on the left-hand side of the NI ELVIS III workstation serves two purposes. It aids in connecting the NI ELVIS III to your host computer, and you can programmatically monitor ...

This section provides step-by-step instructions on how to access and control the instruments on the NI ELVIS III by using the Soft Front Panels (SFPs), and how to program the I/O on the NI ELVIS III by ...

Showing 1-30 of 282006 results
1 of 9401 pages