61xx Models : DAQ Multifunction I/O Cable and Accessory Compatibility

Overview

Use this guide to match your NI Multifunction I/O (MIO) 61xx models for PCI, PXI, and PXI Express (PXIe) with a compatible cable and accessory to meet the needs of your application, replacing or expanding your current configuration, or verifying that existing parts can be used in a different configuration.

NI Multifunction I/O (MIO) 61xx models (formerly referred to as NI S Series) are the previous generation of NI simultaneous sampling MIO (SMIO) DAQ hardware. They allow for analog, digital, and counter input and output through a variety of connectivity options.

This page is part of the NI DAQ Multifunction I/O Cable and Accessory Compatibility Guide.

Contents

How to Use this Guide

It is important to work through this guide sequentially to identify and then pair up your device with compatible cables and accessories. To do this, complete the following steps:

  1. Find your module or device in the Device List.
  2. Use the Cable and Accessory Compatibility Tables to identify your device.
  3. Check the Known Limitations and Issues List for any known limitations you may encounter.
  4. Note: Using the page search functionality in your browser to locate your model may speed up this process, typically CTRL+F on Windows or ⌘+F on OS X.

 

Device List

Begin by using the following tables to locate your device or module. Once found, note your connector type, pin count, and any other notes for reference. Next, move to the Cable and Accessory Compatibility Tables.

Important Note: "Group" used in this context is solely to categorize devices together that use the same cables and accessories. It does not necessarily indicate similar functionality, specifications, or other commonalities between the devices.

 

Group 1: 68-Pin Simultaneous Sampling Multifunction I/O 61xx Models Device And Module

Identify your 68-pin SCSI 0.050 D-Type device or module, then click to jump to the compatibility table.
ModelConnector TypeNotes
PCI-6110SCSIFormerly referred to as the NI 6110E
PCI-6111SCSIFormerly referred to as the NI 6111E
PCI-6115SCSI 
PXI-6115SCSI 
PCI-6120SCSI 
PXI-6120SCSI 
PCI-6122SCSI 
PXI-6122SCSI 
PCI-6123SCSI 
PXI-6123SCSI 
PCI-6132SCSI 
PXI-6132SCSI 
PCI-6133SCSI 
PXI-6133SCSI 


Group 2: 68-Pin Simultaneous Sampling Multifunction I/O 61xx Models Device and Module

Identify your 68-pin VHDCI device or module, then click to jump to the compatibility table.
ModelConnector TypeNotes
PXIe-6124VHDCIRefer to the Known Limitations and Issues List
PCI-6143VHDCI 
PXI-6143VHDCI 


Group 3: 37-Pin Simultaneous Sampling Multifunction I/O 61xx Models Isolated Device

Identify your 37-pin isolated device, then click to jump to the compatibility table.
ModelConnector TypeNotes
PCI-6154DSUBIsolated device

 

Cable and Accessory Compatibility Tables

Find the compatibility table that matches the pin count and connector type of your device. If you have questions on terminology, refer to the Glossary. After you have identified the cable and accessory options for your device from this section, move to the Known Limitations and Issues List.

Note: To help keep the size down of the compatibility tables, the terms terminal block and connector block are used interchangeably.

 

Group 1: SCSI 68-Pin Simultaneous Sampling Multifunction I/O 61xx Models Device And Module

Use this table to identify compatible SCSI 0.050 D-Type cables and accessories.
Module or DeviceCablesAccessories
ShieldedUnshieldedCustom Connect-
ivity
Screw Terminal BlockBNC Terminal BlockTerminal Block - PXI MountedSCC Screw Term-
inal Block
SCC CarrierScrew Terminal Block - DIN Rail MountScrew Terminal Block
6110, 6111

SH68-68-EPM
(Recommended,
Shielded)

SH68-68R1-EP (Shielded, Right Angle Connector)

SH68-68 
(Basic Shielding)

R68-68
(Low Cost)

SCB-68A
SCB-681
BNC-2110
BNC-2120
BNC-2090A
BNC-20901
N/ASCC-68N/ATBX-68CB-68LP
CB-68LPR
CA-1000
SH68-50
(Basic Shielding, conversion to 50-pin)
N/AN/AN/AN/AN/AN/ACB-50
CB-50LP
N/A
6115, 6120

SH68-68-EPM
(Recommended,
Shielded)

SH68-68R1-EP (Shielded, Right Angle Connector)

SH68-68 
(Basic Shielding)

R68-68
(Low Cost)

SCB-68A
SCB-681
BNC-2110
BNC-2120
BNC-2090A
BNC-20901
TB-27052
TB-27082
SCC-68N/ATBX-68CB-68LP
CB-68LPR
CA-1000
6122, 6123
6132, 6133

SH68-68-EPM
(Recommended,
Shielded)

SH68-68R1-EP (Shielded, Right Angle Connector)

SH68-68 
(Basic Shielding)

R68-68
(Low Cost)

SCB-68A
SCB-681
BNC-2110
BNC-2120
BNC-2090A
BNC-20901
TB-27052
TB-2709
2
SCC-68N/ATBX-68CB-68LP
CB-68LPR
CA-1000
SH68-50
(Basic Shielding, conversion to 50-pin)
N/AN/AN/AN/AN/AN/ACB-50
CB-50LP
N/A


1SCB-68A and BNC-2090A are newer designs recommended for all new applications over the SCB-68 and BNC-2090.
2TB-2705, TB-2708, and TB-2709 can only be attached directly to PXI modules front connector, and does not require a cable.

 

Group 2: VHDCI 68-Pin Simultaneous Sampling Multifunction I/O 61xx Models Device or Module

Use this table to identify compatible VHDCI cables and accessories.
Module or DeviceCablesAccessories
ShieldedUnshieldedCustom Connect-
ivity
Screw Terminal BlockBNC Terminal BlockTerminal Block - PXI MountedSCC Screw Term-
inal Block
SCC CarrierScrew Terminal Block - DIN Rail MountScrew Terminal Block
6124, 6143

SHC68-68-EPM
(Recommended,
Shielded)

RC68-68
(Low Cost)

SCB-68A
SCB-681
BNC-2110
BNC-2120
BNC-2090A
BNC-20901
TB-27062SCC-68N/ATBX-68CB-68LP
CB-68LPR
CA-1000
SHC68-C68-EPM
(Custom Connectivity)3
N/AN/AN/AN/AN/AN/AN/AN/A


1SCB-68A and BNC-2090A are newer designs recommended for all new applications over the SCB-68 and BNC-2090.
2TB-2706 can only be attached directly to PXI/PXI Express modules front connector, and does not require a cable.
3Please review Known Limitations and Issues List for information on using this custom connectivity cable.

Click here to jump to the Known Limitations and Issues List.

 

Group 3: DSUB 37-Pin Simultaneous Sampling Multifunction I/O 61xx Models Isolated Device

Use this table to identify compatible 37-pin DSUB cables and accessories.
DeviceCablesAccessories
ShieldedUnshieldedCustom Connectivity
Screw Term-
inal Block
BNC Term-
inal Block
Terminal Block - PXI MountedSCC Screw Terminal BlockSCC CarrierScrew Terminal Block - DIN Rail MountScrew Terminal Block
6154

DB37M-DB37F-EP (Recommended,
Shielded

SH37F-37M
(Shielded,
Derated)

R37F-37M
(Low Cost)

N/AN/AN/AN/AN/ACB-37FH
CB-37FV
CB-37F-HVD
CB-37F-LPTB-37F-37CP
TB-37F-37SC
SH37F-P-4
(Shielded,
Pigtail Ends)
N/AN/AN/AN/AN/AN/AN/AN/A

 

Known Limitations and Issues List

This section is important to review because not every cable and accessory combination allows access to the full functionality of your NI DAQ simultaneous sampling Multifunction I/O 61xx device or module. This list contains notes about known limitations when using certain combinations of DAQ cables and accessories. If your device or cable is not listed in this section, there are no known exceptions for it.

Modules:

Review this table to identify potential limitations and known issues with your module.
ModelNote
PXIe-6124

The NI 6124/6154 User Manual (August 2008), P/N 372613A-01, incorrectly lists SH68-* cables, which are SCSI 0.050 D-Type models. The correct shielded cable for this model is the VHDCI SHC68-68-EPM cable, as listed in this guide.

 

 Cables:

ModelNote
SHC68-68-EPMFor VHDCI connections, NI recommends that you use the SHC68-68-EPM cable; however, an SH68-68-EP cable will work with NI Multifunction I/O 61xx Models. The SHC68-68-EPM cable is a newer design featuring additional shielding and specific cable pairings to improve noise performance.
SHC68-C68-EPMThe SHC68-C68-EPM can be used for any device or module for which the SHC68-68-EPM is recommended. The SHC68-C68-EPM is intended for custom breakout fixtures that use the VHDCI 0.8 mm connector. DAQ accessories only feature a SCSI 0.050 D-Type connector and will not work with this cable.
SH68-68-EPMFor SCSI 0.050 D-Type connections, NI recommends that you use the SH68-68-EPM cable; however, an SH68-68-EP cable will work with NI Multifunction I/O 61xx Models. The SH68-68-EPM cable is a newer design featuring additional shielding and specific cable pairings to improve noise performance.
SH68-50Some functionality is unavailable when you use the SH68-50 cable with the NI 6110, 6111, 6122, 6123, 6132, or 6133 device or module. Refer to the S Series User Manual for more information.

 

Glossary

Review the DAQ Cable and Accessory Guides for more information about this terminology and other descriptors.

  • 0.050 D-Type - Industry standard SCSI connector standard featuring 0.050 pin spacing that is used in 50, 68 and 100-position DAQ cable and accessory connections. Click here for an example.
  • D-Sub (DSUB) - An industry standard 37-pin D-Sub connector. Click here for an example.
  • Ribbon Cable - A low-cost unshielded cable solution. Click here for an example.
  • Shielded Cable - A high performance cable solution that offers noise reduction through shielded conductors. Click here for an example.
  • Shielded Terminal Block or Connector Block - A high performance accessory solution offering very low-noise signal termination through shielding. Click here for an example.
  • Unshielded Terminal Block or Connector Block - An alternative low cost accessory solution that does not offer shielding. Click here for an example.
  • Very-High-Density Cable Interconnect (VHDCI) - An improvement on the SCSI 68-pin connector featuring .8 mm pin spacing, allowing a smaller footprint and fewer bent pins during connection. Click here for an example.

 

Ordering Information

When purchasing a NI DAQ simultaneous sampling Multifunction 61xx Model device or module, for ease of use, the cables and accessories are listed on the product selection page. To begin browsing NI DAQ devices and modules, visit ni.com/daq.

You may also purchase your cables and accessories separately. 

Was this information helpful?

Yes

No