National Instruments strongly recommends using that latest version of NI-WSN and LabVIEW with NI-WSN hardware.
Note: If no driver version is listed, then the module is not supported in that gateway or node.
Hardware | NI LabVIEW (32 bit)**** | NI LabVIEW Module (32 bit) | NI-WSN | Other NI Driver Requirements |
Nodes |
||||
NI WSN-3202 | 8.6.1 or later | WSN Module 8.6.1 or later | 1.0.2 or later | - |
***NI WSN-3212 | 8.6.1 or later | WSN Module 2010 or later | 1.3.0 or later | - |
***NI WSN-3226 | 8.6.1 or later | WSN Module 2010 or later | 1.3.0 or later | - |
NI WSN-3214 | 2011 or later | WSN Module 2011 or later | 1.3.1 or later | - |
NI WSN-3230 | 2011 or later | WSN Module 2011 or later | 1.3.0 or later | - |
NI WSN-3231 | 2011 or later | WSN Module 2011 or later | 1.3.0 or later | - |
Gateways |
||||
NI WSN-9791 | 8.6.1 or later | - | 1.0.2 or later | - |
*NI 9792 | 2010 or later | 2010 Real-Time Module or later | 1.3.0 or later | - |
**NI 9795 | 2011 or later | 2011 Real-Time Module or later | 1.3.0 or later | NI-RIO 4.0 or later |
* To use the NI 9792 WSN Real-Time Gateway you must install both NI LabVIEW 2009 Service Pack 1 (SP1) (32-bit) or later and NI LabVIEW 2009 SP1 (32-bit) Real-Time Module or later.
** To use the NI 9795 WSN C Series Gateway you must have LabVIEW and LabVIEW Real-Time 2011 or later and a CompactRIO that supports the RIO Scan Interface (RSI) or Scan Engine. See the following link to find a list of supported devices.
*** If using the LabVIEW WSN Module on the NI WSN-3212 and 3226 nodes labVIEW 2010 base/full/professional or later is required.
**** NI-WSN is not supported in LabVIEW 2014.
OS | NI-WSN | NI LabVIEW | NI LabVIEW WSN Module |
Windows 10 | Current1 | Current1 | Current1 |
Windows 8 | Current2 | Current2 | Current2 |
Windows 7 | Current | Current | Current |
Windows Vista | Current | Current | Current |
Windows XP (32 bit only) |
Current | Current | Current |
Windows 2000 SP3 | 1.0.2 | 2009 SP1 | 2009 SP1 |
"Current" indicates that the latest version of NI-WSN supports the indicated operating system.
1 - Please see this Developer Zone for the most up to date information on support for Windows 10 and National Instruments Products.
2 - Please see this Developer Zone for the most up to date information on support for Windows 8 and National Instruments Products
LabVIEW Version (32 bit) | NI-WSN 1.0.2 | NI-WSN 1.1.0 | NI-WSN 1.2.0 | NI-WSN 1.2.1 | NI-WSN 1.3.0 | NI-WSN 1.3.1 | NI-WSN 1.4 | NI-WSN 1.5 | NI-WSN 15.0 |
8.6.1 | |||||||||
2009 SP1 | |||||||||
2010 SP1 | |||||||||
2011 SP1 | |||||||||
2012 SP1 | |||||||||
2013 SP1 | |||||||||
2014 SP1 | |||||||||
2015 SP1 |
The areas in blue represent version of LabVIEW support for the given version of NI-WSN.