From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
Note: NI-RIO Version 14.5 is the last version of this driver. Starting with LabVIEW 2015, NI-RIO has been split into three separate installers. CompactRIO Device Drivers (supports CompactRIO and Single-Board RIO), R Series Multifunction (supports R Series cards), and FlexRIO (supports FlexRIO boards).
This page shows the installed versions of Measurement & Automation Explorer (MAX) with NI-RIO. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).
NI-RIO Version | MAX Version |
---|---|
14.5 | 14.5.0 |
14.0.1 | 14.0.0 |
13.1 | 5.6.0 |
13 | 5.5.0 |
12.1 | 5.4.0 |
12 | 5.3 |
4.0.0 | 5 |
3.6.1 | 4.7.7 |
3.6.0 | 4.7.7 |
3.5.1 | 4.7 |
3.5.0 | 4.7 |
3.4.0 | 4.6.2 |
3.3.1 | 4.6.2 |
3.3.0 | 4.6.2 |
3.2.1 | 4.6.1 |
3.2.0 | 4.6 |
3.1.1 | 4.5.1 |
3.1.0 | 4.5.1 |
3.0.1 | 4.5 |
3.0.0 | 4.5 |
2.4.1 | 4.4.1 |
2.4.0 | 4.4 |
2.3.1 | 4.3 |
2.3.0 | 4.3 |
2.1.3 | 4.2.1 |
2.1.2 | 4.2 |
2.1.1 | 4.2 |
2.1.0 | 4.1 |
2.0.2 | 4 |
2.0.1 | 4 |
2.0.0 | 4 |
1.3.1 | 3.1.1 |
1.3.0 | 3.1.1 |
1.2 | 3.1.1 |
1.1.1 | 3.1.1 |
1.1.0 | 3.1 |