From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
ID |
Fixed Issue |
241200 |
Programmatically enabling counter-driven output on C Series digital I/O modules that support Specialty Digital Configuration resulted in error 42. |
278594 |
Accessing PXI FlexRIO devices through a laptop across MXI-Express could limit throughput of the FlexRIO. |
280474 |
Reading some unconfigured C Series module properties through the Scan Engine interface crashed the CompactRIO controller and required a controller reset. |
284752 |
Calling the Wait on IRQ function sometimes returned “Error -52010: The requested resource must be initialized before use” after running correctly for several hours. |
287685 |
Using memory-mapped I/O on a RIO device after the Windows host went through a sleep/wake cycle would return invalid data but no error. |
290801 |
In some cases, the watchdog timer on the NI cRIO-9075 and NI cRIO-9076 could assert up to 204.8 us earlier than expected. |
291487 |
Calling the DMA FIFO Read and Download functions on the same R Series FPGA session could cause a crash on the host Windows system. |
291947 |
Calling the DMA FIFO Read and Reset functions simultaneously on an R Series board could cause a crash on the host Windows system. |
293582 |
C Series module properties available through the FPGA Interface were not available through the Scan Engine. |