Filtered Results

Configures the pulse voltage level that the device attempts to generate for the specified channel(s) during the on phase of a pulse. The pulse voltage level setting is applicable only if the output function ...

Configures a range defining valid values that the pulse voltage limit and pulse bias voltage limit can be set to for the specified channel(s). The pulse voltage limit range setting is applicable only if ...

Configures the pulse voltage limit that the output must not exceed when generating the desired pulse current level for the specified channel(s). The pulse voltage limit setting is only applicable if the ...

Specifies whether to use local or remote sensing of the output voltage on the specified channel(s). Not supported Not supported in VIs that run in a web application niDCPower Configure Sense.vi :/NIDCPowerVIRef.chm::/niDCPower_Configure_Sense.html ...

Configures the Measure trigger for software triggering. Use the Send Software Edge Trigger node to assert the trigger condition. Not supported Not supported in VIs that run in a web application This node ...

Configures the Pulse trigger for software edge pulse triggering. Not supported Not supported in VIs that run in a web application This node does not support the following hardware: PXI-4110 PXI-4130 niDCPower ...

Configures the Sequence Advance trigger for software triggering. Use the Send Software Edge Trigger node to assert the trigger condition. Not supported Not supported in VIs that run in a web application ...

Configures the Source trigger for software triggering. Use the Send Software Edge Trigger node to assert the trigger condition. Not supported Not supported in VIs that run in a web application This node ...

Configures the Start trigger for software triggering. Use the Send Software Edge Trigger node to assert the trigger condition. Not supported Not supported in VIs that run in a web application This node ...

Returns the measured value of either the voltage or current on the specified output channel. Each call to this node blocks other node calls until the hardware returns the measurement. Not supported Not ...

Showing 81-90 of 179 results
9 of 18 pages