Filtered Results

FlexLogger supports both hardware and software filters for use in your project. Hardware filters offer a variety of filter type options to provide anti-aliasing and noise reduction with no CPU usage or ...

Configure your measurement for use in the project by adding signals to the Channel Specification. For information on how to configure signals, refer to the Configuring Device Channels topic. Set up the ...

Hover over the channel row to see the Configure gear . Click the gear for the channel you wish to add a strain gage to. Select the desired Bridge Configuration. Specify the Bridge Resistance (if available), ...

In your Logging specification document, specify values for the Operator and DUT in the Test Properties section, if desired. The fields for Operator and DUT are auto-populated, but can be changed or deleted, ...

You can set output channels to their Reset Value by creating an event and using the Reset output channels action. Hover over the channel row to see the Configure gear . Click the gear for the channel you ...

While the test is running, click the Add Note button in the toolbar. A dialog will open, timestamped with the time the button was clicked. Record any information you wish to include in the log file. Note ...

CAN interfaces are software representations of physical ports. Complete the following steps to adjust the port settings. Enable Termination, if necessary. Improperly configured Termination schemes might ...

LIN interfaces are software representations of physical ports. Complete the following steps to adjust the port settings. Enable Termination, if necessary. Improperly configured Termination schemes might ...

Hardware Does Not Appear in the Channel Specification If you are having trouble finding your hardware in the FlexLogger Channel Specification, try the following options. Refer to the list of supported ...

Navigate to the Graphs palette on your Screen.flxscr document. Click the graph you want to use and drag it onto the Screen. Add the channels you want to visualize to the graph as shown in the Mapping an ...

Synchronization-enabled devices use the IEEE 802.1AS protocol over the network and cannot synchronize with devices that use other protocols or IEEE 1588 profiles or vice versa. Ensure that your system ...

What to UseThe following FlexLogger and LabVIEW software versions are required to support the SystemLink tag feature: LabVIEW 2017 or later FlexLogger 2018 R4 or later What to Do Install LabVIEW. Install ...

On the Data tab, right-click any log file and select Locate in Windows Explorer. Right-click the TDMS log file you want to open and select Open with»Excel Importer.

On the Data tab, double-click the data log file to launch the DIAdem-based FlexLogger TDMS Viewer. If you have a separately licensed version of DIAdem installed, you can configure FlexLogger to launch ...

Select one of the following options depending on your automotive network: Use CAN databases—Manage and configure CAN databases to determine which signals to use in your Channel Specification. Use LIN databases—Manage ...

Visualize Live Data Use the Screens document to create a custom dashboard to visualize live data. Map your signals to the indicators Use a graph to visualize live data View Your Logged Data Use any of ...

You must have channels added and configured for your FlexLogger project in order to visualize data from your sensor signals. Refer to the Configuring Device Channels topic for more information. Map your ...

Select one or more channels you wish to configure. Hover over a channel row to see the Configure gear . Click the gear for the channel or channels you wish to configure. The configure gear appears when ...

Complete the following steps to configure the available data rates for your DAQ device: Click the Configure Data Rates button on the toolbar, or click Configure from the Data Rate Level pull-down selector. ...

Refer to the following information to configure your device channels. Configuring I/O Channels Configuring an Automotive Bus Configuring Calculated Channels After you configure your channels, you can start ...

Add a channel produced by applying either a lowpass or a highpass Butterworth filter to an existing hardware channel. The lowpass or highpass filter channel displays filtered data that excludes any noise ...

Add and configure signals to use in your Channel specification. Use any of the following options that apply to the devices in your system: Configure sensors in your Channel Specification Configure digital ...

Select one or more channels you wish to configure. Hover over a channel row to see the Configure gear . Click the gear for the channel or channels you wish to configure. The configure gear appears when ...

Low-Speed CAN requires termination at the Low-Speed CAN transceiver instead of on the cable. The termination requires two resistors: RTH for CAN_H and RTL for CAN_L. This configuration allows the NXP fault-tolerant ...

In your Logging specification document, select a Start condition for your trigger. Selecting any Triggering conditions will enable the trigger. Select from the following trigger start conditions: Test ...

Each LED can display two colors (red or green), which display in the following four patterns: Pattern Meaning Off No LED illumination Solid LED fully illuminated Blink Blinks at a constant rate of several ...

Select one or more channels you wish to add an alarm to. Hover over a channel row to see the Configure gear . Click the gear for the channel you wish to add an alarm to. Select the Alarms tab in the Channel ...

Use shunt calibration to adjust for errors on your bridge circuits caused by resistance of the lead wires between the EX pins on the device and the strain gage. To use shunt calibration, channels must ...

Hover over the channel and click Scan for TEDS . FlexLogger will scan all selected channels for any connected TEDS sensors. The following table lists the possible results of the Scan for TEDS action. Sensor ...

Choose any of the following methods to extend the functionality of FlexLogger to integrate third-party I/O, add custom calculations, and communicate with external systems to supplement your data acquisition ...

Showing 31-60 of 70 results
2 of 3 pages