Filtered Results

Use this branch for devices with minimum NI-DAQmx support <=18.0: FD-11603/11613/11637 The onboard 100 MHz oscillator automatically synchronizes to other network-synchronized devices that are part of your ...

Recommended networking topologies are described in this section. Host—Can be a Windows computer or a real-time controller with the NI Linux Real-Time operating system, such as the IC-317x, cRIO-9035/9039 ...

You can use the FieldDAQ device as expansion I/O from certain NI Linux Real-Time controllers. Discover and configure the NI Linux Real-Time controller in NI MAX, then discover and configure the FieldDAQ ...

To reset your FieldDAQ device to factory-default settings, complete the following steps. Verify the power source is turned off. Connect Ethernet port 0 and port 1 with an Ethernet cable. Connecting Port ...

In a ring topology, the host communicates with all nodes through the most effective path. You must use an external switch in a ring topology. You must configure the network properly with a recommended ...

In a star topology, the host communicates directly with each node through the external switch. You must use an external switch in a star topology; for network synchronization, you must use an external ...

Never touch the exposed pins of connectors. To avoid ESD damage in handling the device, take the following precautions: Ground yourself with a grounding strap or by touching a grounded object. Touch the ...

You can use time as a trigger for sync pulses on the FieldDAQ device. To use a sync pulse with a time source, specify a specific time in NI-DAQmx. Refer to the Time Triggering topic in the NI-DAQmx Help ...

The cDAQ-9185/9189 and FieldDAQ Firmware FOSS Notices (NI part number 377121x-01) document contains information about open source code use and software licenses for FieldDAQ firmware versions. To view ...

This document includes compliance precautions and connection information for the FD-11637. Regulatory Icons Notice—Take precautions to avoid data loss, loss of signal integrity, degradation of performance, ...

Showing 1-10 of 57 results
1 of 6 pages