PXIe-8881 Firmware and Additional Drivers Readme

June 2021

This file contains installation instructions and compatibility information for PXIe-8881 Firmware and Additional Drivers.


Controller Deployable Firmware Installation Instructions

Legal Information


Controller Deployable Firmware Installation Instructions

Complete the following steps to update PXI Controller Firmware Package:

  1. Download and save the firmware image for your PXI controller to the system that contains the controller to update. If the target system runs RT OS, save the firmware image to a host system.
  2. On the host system launch NI Measurement & Automation Explorer (MAX) with administrator privileges.
  3. Use MAX to upgrade the firmware.
  4. For the controller to be updated:
  5. Follow any additional instructions provided when the update completes.

If the dialog reports an issue, record the error number and message and contact NI.

Legal Information

Copyright

© 2021 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

378618A-01