This file contains important information about Data Record Autonomous Driving Plug-In Creation Toolkit 1.1 (Plug-In Creation Toolkit), including installation instructions. You can use the Plug-In Creation Toolkit to create and modify I/O plug-ins to interface with your Data Record System AD (Data Record System) based on your application needs.
You can find more release information on ni.com.
Plug-In Creation Toolkit 1.1 has the following requirements:
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2020.
Plug-In Creation Toolkit 1.1 supports the following controllers:
Note The PXIe-8881 controller is functionally supported, but its high power consumption levels must taken into account during power budgeting.
Plug-In Creation Toolkit 1.1 supports the following operating system:
The Plug-In Creation Toolkit supports the following application software versions, including service packs.
Download the Plug-In Creation Toolkit as part of the Data Record AD Development Suite software installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Install VI Package Manager. Install the following packages from VI Package Manager:
Plug-In Creation Toolkit 1.1 adds the following major new feature:
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
The .NET 4.6.2 installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
© 2021 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.