October 2015
The NI-488.2 for Windows 15.0.0 Patch 1 fixes three issues that were discovered following the release of NI-488.2 for Windows version 15.0. This patch is available for customers who have installed NI-488.2 for Windows 15.0.
| NI Bug ID | Description |
| 538997 | An NI4882 API call in a multithreaded or multiprocess application results in an unexpected error due to unprotected API calls to an open device handle. |
| 542306 | When an application exits while there is asynchronous IO pending on ENET interfaces, the application crashes. |
| 547340 | GPIB ports may not be reported in NI MAX, Web Configuration, and System Configuration API with NI-488.2 15.0.0 on LabVIEW Real-Time OS. |
For additional information, contact National Instruments support through direct email or phone, and have the NI bug ID available.
The NI-488.2 for Windows 15.0.0 Patch 1 consists of the following packages (MSIs):
The NI-488.2 for Windows 15.0.0 Patch 1 is available through NI Update Service. You can also install the patch manually by following these steps:
After installing the NI-488.2 for Windows 15.0.0 Patch 1, you must also deploy the patch to any Real-Time targets.
Thank you for your interest in NI-488.2 for Windows. We appreciate communicating with the people who use our products. We are also very interested in hearing about the applications you develop using our products. Our Web site, ni.com, provides advanced support and services and contact information.
Copyright
© 1995–2015 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
375688A-01