This file contains important information about the NI InsightCM™ SDK software, including system requirements, installation instructions, and known issues.
The NI InsightCM SDK consists of the following components:
|Component||Where to Find|
|Reference code for device software that runs on NI real-time targets||<InstallDir>:\Program Files (x86)\National Instruments\LabVIEW 2016\InsightCM\Devices\cRIO\Base|
|LabVIEW APIs for customizing the device software||In LabVIEW on the Functions»Add-ons»InsightCM palette.|
|A LabVIEW API for developing a service to communicate with services running in NI InsightCM Server||On the Functions»Add-ons»InsightCM»Message Service palette.|
|An example of a C#-based service||<InstallDir>:\Program Files (x86)\National Instruments\LabVIEW 2016\examples\InsightCM\ExampleServiceApp|
|An example of a LabVIEW-based service||<InstallDir>:\Program Files (x86)\National Instruments\LabVIEW 2016\examples\InsightCM\MessageService|
The NI InsightCM SDK supports NI InsightCM Server 3.0.
The following sections describe the hardware and software requirements for the components of the SDK.
The computer on which you install and develop with the NI InsightCM SDK has different software requirements for developing with LabVIEW based on what task you want to perform. The following table lists the software requirements for the most common tasks in the InsightCM SDK.
|Note All NI software in the following list is included on the INSIGHTCM SDK SUPPORT USB.|
|Create new device|| |
|Create new LabVIEW-based service||LabVIEW 2016 (32-bit)|
|Create new C#-based service||Visual Studio 2015 |
|Create a new Motor Current Signature Analysis (MCSA) device|| |
To run software developed with the NI InsightCM SDK on a CompactRIO, you must first download various supporting software components to the target. Use the LabVIEW Real-Time Software Wizard in NI Measurement & Automation Explorer to download software to a target. For more information on how to install software onto a remote system, refer to Installing a Custom Software Selection in the Measurement & Automation Explorer Help.
Targets must have the following software installed:
Complete the following steps to install the NI InsightCM SDK software:
|Note Visit ni.com/info and enter the Info Code USBGuideSpec for the USB flash drive user guide and specifications.|
You can access the software and documentation known issues list online. Visit ni.com/info and enter the Info Code ICM3KI for an up-to-date list of known issues in NI InsightCM.
You can access the NI InsightCM SDK help in LabVIEW by selecting Help»LabVIEW Help and navigating to the NI InsightCM SDK Help topic.
Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the NI InsightCM SDK are located in the labview\examples\InsightCM directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
© 2015–2016 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.