VirtualBench 19.0 Readme

September 2020

This file contains important information about VirtualBench 19.0, including any system requirements and supported devices for the application and the driver software. VirtualBench 19.0 adds support for LabVIEW 2019.

Supported Operating Systems

Application Software Support

VirtualBench 19.0 Drops Support for Microsoft Windows 7 SP1, Windows 8.1, Windows Server 2012 R2, and Windows Server 2008 R2 SP1

Product Security and Critical Updates

New Features

Devices Supported in VirtualBench

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Legal Information


Supported Operating Systems

VirtualBench supports the following operating systems:

  • Windows 10

Application Software Support

The following table lists the NI application software versions, including service packs, supported by VirtualBench.

NI Application Software Versions Supported by VirtualBench
LabVIEW 2016, 2017, 2018, 2019

Microsoft Visual Studio Support

The following table lists the programming languages and Microsoft Visual Studio versions supported by this version of VirtualBench.

Programming Language Visual Studio Versions Supported by VirtualBench
ANSI C 2003, 2005, 2008, 2010, 2012, and 2015

VirtualBench 19.0 Drops Support for Microsoft Windows 7 SP1, Windows 8.1, Windows Server 2012 R2, and Windows Server 2008 R2 SP1

With this release, VirtualBench drops support for Microsoft Windows 7 RTM SP1, Windows 8.1, Windows Server 2012 R2 and Windows Server 2008 R2 SP1. VirtualBench 19.0 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use VirtualBench 19.0 to an unsupported OS. Additionally, after installing VirtualBench 19.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

New Features

This version of VirtualBench adds support for LabVIEW 2019.

Note  For additional information on features in Windows versus iOS, refer to the VirtualBench Features for Windows Application and iPad App. For more information on what has changed with each firmware update, refer to the VirtualBench Firmware Release Notes.

Devices Supported in VirtualBench

The following devices are supported in VirtualBench:

  • NI VB-8012
  • NI VB-8034
  • NI VB-8054

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.


Legal Information

Copyright

© 20142019 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

  • Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
  • EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
  • Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

374955K-01