Thank you for using NI LabVIEW Instrument Design Libraries for IF Digitizers (the Instrument Design Libraries). This file contains important information about the Instrument Design Libraries and is organized into the following sections:
The Instrument Design Libraries support the NI PXIe-5624R IF digitizer.
The following table lists operating system compatability for the Instrument Design Libraries.
|Operating System||Supports Host Software||Supports Viewing and Customizing FPGAs and Compiling on an External Farm1||Supports Compiling FPGAs Locally on the System|
|Windows 7 (64-bit)|| |
|Windows 7 (32-bit)|| |
|Windows Vista (64-bit)|| |
|Windows Vista (32-bit)|| |
|Windows XP SP3 (32-bit)|| |
|Windows 8.x (64-bit)|| |
|Windows 8.x (32-bit)|| |
1Refer to LabVIEW FPGA documentation for information about using external compile farms on Windows, Linux, or the cloud.
NI recommends that you have the most recent service pack for your operating system installed.
Note Memory requirements vary according to both the FPGA target and the FPGA VI you create for that target. Additional RAM beyond the recommended system requirements may be necessary to compile multiple FPGA images concurrently. Refer to the LabVIEW FPGA Module Readme for more information about determining your memory needs for FPGA VI compilation.
Note You should install LabVIEW and LabVIEW FPGA (recommended) before installing the Instrument Design Libraries. To add support for ADEs installed after installing the Instrument Design Libraries, modify your Instrument Design Libraries installation or launch the Instrument Design Libraries installer again.
Note LabVIEW 2014 (32-bit) is the only supported version of LabVIEW for NI LabVIEW Instrument Design Libraries for IF Digitizers 14.0.
|Files||Installed Location on Windows 8.x (32- and 64-bit)/8 (32- and 64-bit)/7 (32- and 64-bit)/Vista (32- and 64-bit)/XP|
|IF Digitizer Instrument Design Libraries||<NIDIR>\LabVIEW 2014\instr.lib\niIFDig|
|Common Instrument Design Libraries||<NIDIR>\LabVIEW 2014\instr.lib\_nInstr|
|Calibration Support for LabVIEW||<NIDIR>\LabVIEW 2014\instr.lib\niIFDig\Calibration|
Documentation for the Instrument Design Libraries is located at Start»All Programs»National Instruments»IF Digitizers»IF Digitizers Documentation. The documentation set is composed of the following documents.
|NI IF Digitizers Help||HTML/Windows Help||Contains primary help content for NI IF digitizer products. The help is an HTML version of a traditional user manual that includes the following information: |
|NI PXIe-5624R Getting Started Guide||Printed and PDF||Contains software and hardware installation, MAX configuration, signal connection, and troubleshooting information for your device.|
|NI PXIe-5624R Specifications||Lists technical specifications for your device.|
|NI PXIe-5624R Calibration Procedure||Contains calibration instructions for your device.|
|NI LabVIEW Instrument Design Libraries for IF Digitizers Readme||HTML (this document)||Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.|
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
Note To view PDFs, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.
The Instrument Design Libraries palette VIs are available on the host from the Functions»FPGA Interface»Software-Designed Instruments»IF Digitizers palette. For FPGA VIs, palettes specific to the FPGA target are available from the Functions palette.
To access the LabVIEW sample projects and templates from the Create Project dialog box, select Sample Projects»IF Digitizers in the left pane and navigate to the project that best matches your application requirements.
Visit ni.com/critical-updates for information about critical updates and security notifications from National Instruments.
For Windows XP, complete the following steps:
For Windows 7/Vista, complete the following steps:
For Windows 8.x/8, complete the following steps:
As part of the Instrument Design Libraries installation, the following software is installed. To completely remove the Instrument Design Libraries installation from your system, you must remove all of the following packages:
Caution The software packages listed above are shared with other NI software packages. For example, NI-RFSA support for the NI 5668R vector signal analyzer requires the NI IF Digitizer Software-Designed Instrument Runtime. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly. Creating Instrument Design Library applications for the NI 5668R requires both of the listed packages.
Note Do not attempt to uninstall by manually deleting files.
You can access the software and documentation known issues list online. Refer to the NI LabVIEW Instrument Design Libraries for IF Digitizers Known Issues at ni.com for an up-to-date list of known issues in NI LabVIEW Instrument Design Libraries for IF Digitizers.
This is the first release of LabVIEW Instrument Design Libraries for IF Digitizers. In future releases, refer to the readme for bug fix details.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.
NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
|Note NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher.|
For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary.
|Current Application||Icon Location||Pin to Action|
|Windows 8.x Desktop||Desktop Taskbar||Right-click application and select Pin to Taskbar|
|Windows 8.x Desktop||Start screen||Right-click application and select Pin to Start|
|Windows 8.x Start screen||Desktop Taskbar||Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen|
If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8) or click the down arrow on the bottom left of the screen (Windows 8.x).
For more information about NI support for Windows 8.x, visit ni.com/windows8.
© 2014 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.