This file contains important information about the RFmx SpecAn, including system requirements, and installation instructions.
RFmx SpecAn offers simple access to the most advanced optimization techniques such as multi-measurement parallelism, multi-DUT measurements, and high dynamic range noise correction. The result is extremely fast and high-quality measurements with the minimal software development effort.
RFmx SpecAn 20.7 includes the following new features:
RFmx SpecAn 20.6 includes the following new features:
RFmx SpecAn 20.0 includes the following new features:
The following hardware products are supported in all operating systems listed in the Supported Operating Systems section.
Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.
Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.
RFmx SpecAn has the following requirements:
* Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
RFmx SpecAn 20.7 supports the following 64-bit operating systems:
Note RFmx SpecAn no longer supports Windows Vista/XP/7/8.1, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. RFmx SpecAn 20.7 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use RFmx SpecAn 20.7 to an unsupported OS. Additionally, after installing RFmx SpecAn 20.7, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For detailed information about NI operating system support, visit http://www.ni.com/r/win32bitsupport.
RFmx SpecAn supports the following application software versions, including service packs. You should install application software, such as LabVIEW, LabWindows/CVI or Microsoft Visual Studio®, before installing RFmx SpecAn. If you are not using NI application software, refer to Microsoft Visual Studio Support.
|Application Software||Versions Supported by RFmx SpecAn|
|LabVIEW||2017, 2018 SP1 f4 patch, 2019 SP1 f3 patch, or 2020 SP1|
|LabWindows™/CVI™||2015 or later|
If you are using the RFmx SpecAn .NET Class Library, .NET Framework 4.0 (minimum) is required. The RFmx SpecAn .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0.
Download the RFmx SpecAn installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
|Version Compatibility Checker||<NIDir>\RFmx\niRFmxCompatibility_Checker.exe|
|Debug Configuration Utility||<NIDir>\RFmx\niRFmxDebugConfigurationUtility.exe|
|Header files|| |
|Import Library files (64-bit)|| |
|.NET Class Libraries|
|Assemblies|| <MSTUDIOVS2010DIR>\DotNET\Assemblies\Current\NationalInstruments.RFmx.SpecAnMX.Fx40.dll |
Select Start » All Programs » National Instruments » RFmx SpecAn » RFmx Soft Front Panel to launch the RFmx Soft Front Panel (64-bit).
RFmx SpecAn palette VIs are available from the Functions » Measurement I/O » NI-RFmx » SpecAn palette.
Documentation for RFmx SpecAn is located at Start » All Programs » National Instruments » RFmx SpecAn » RFmx SpecAn Documentation. The documentation set is composed of the following documents.
|RFmx SpecAn Help||HTML/Windows Help|| Contains primary help content for RFmx SpecAn. This help file is an HTML version of a traditional user manual that includes the following information: |
|RFmx SpecAn 20.7 Readme||HTML (this document)||Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.|
Select Help » Find Examples from LabVIEW or LabWindows/CVI to launch the NI Example Finder and navigate to Hardware Input and Output » Modular Instruments » NI-RFmx » SpecAn. You can also select the Search tab to search all installed examples by keyword.
You can access all the installed RFmx SpecAn examples at Start » All Programs » National Instruments » RFmx SpecAn » RFmx SpecAn Examples.
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
The following are the behavior changes in RFmx SpecAn 20.7 from RFmx SpecAn 20.6.
The following are the behavior changes in RFmx SpecAn 20.0 from RFmx SpecAn 19.1.
The following are the behavior changes in RFmx SpecAn 19.1 from RFmx SpecAn 19.0.
You can access the RFmx SpecAn known issues online at RFmx SpecAn 20.7 Known Issues.
You can access the RFmx SpecAn bug fix list online at RFmx SpecAn 20.7 Bug Fixes. This list describes a subset of issues fixed in the RFmx SpecAn. If you have a Bug ID, you can search this list to validate that the issue has been fixed.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
© 2014–2021 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.