September 2018
This file contains important information about LabVIEW 2018 Service Pack 1 (SP1) for Linux, including system requirements, installation instructions, known issues, and a partial list of bugs fixed for LabVIEW 2018 SP1.
Refer to the NI website for the latest information about LabVIEW.
Refer to the labview/readme directory for readme files about LabVIEW add-ons, such as modules and toolkits.
Product Security and Critical Updates
Supported Modules and Toolkits
LabVIEW 2018 SP1 for Linux has the following requirements:
| Linux | Run-Time Engine | Development Environment |
|---|---|---|
| Processor | Pentium 4 G1 (or equivalent) or later | Pentium 4 G1 (or equivalent) or later |
| RAM | 256 MB | 1 GB |
| Screen Resolution | 1024 x 768 pixels | 1024 x 768 pixels |
| Operating System | Linux kernel 2.6x or 3.x GNU C Library (glibc) Version 2.11 or later for the Intel x86_64 architecture | openSUSE LEAP 15.0 openSUSE LEAP 42.2 openSUSE LEAP 42.3 Red Hat Enterprise Linux Desktop + Workstation 6.x Red Hat Enterprise Linux Desktop + Workstation 7.x CentOS 7 |
| Disk Space | 98 MB | 1.1 GB for the complete installation |
| Color Palette | N/A | LabVIEW and the LabVIEW Help contain 16-bit color graphics. LabVIEW requires a minimum color palette setting of 16-bit color. |
| Temporary Files Directory | N/A | LabVIEW uses a directory for storing temporary files. NI recommends that you have several megabytes of disk space available for this temporary directory. |
| Adobe Reader | N/A | You must have Adobe Reader installed to search PDF versions of all LabVIEW manuals. |
Note
| ||
Complete the following steps to install and activate LabVIEW for Linux.
Are you installing LabVIEW for the first time? Insert and mount the LabVIEW installation media. As the root user in the mounted directory, enter sh ./INSTALL to install LabVIEW in the /usr/local directory.
To install LabVIEW modules and toolkits, refer to the readme of each product for installation instructions. The VI Analyzer Toolkits installs with the LabVIEW Professional Development System for Linux.
You can install NI device drivers from ni.com/linuxdrivers.
Are you upgrading from a previous version of LabVIEW? Refer to the LabVIEW Upgrade Notes for information about protecting existing VIs and projects before installing a new version of LabVIEW, as well as upgrade and compatibility issues and a complete list of new features in LabVIEW 2018.
Note If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Visit ni.com/security for security information about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
LabVIEW 2018 SP1 for Linux supports the following modules and toolkits.
1 The Control Design and Simulation Module does not support the System Identification VIs, System Identification Assistant, and Control Design Assistant.
2 The MathScript RT Module does not support the libraries class of MathScript RT Module functions.
3 The VI Analyzer Toolkit and Application Builder install with the LabVIEW Professional Development System. For the LabVIEW Full Development System, you can purchase and install the VI Analyzer Toolkit and Application Builder with their own separate media.
Refer to the readme of each product for more information about system requirements, installation instructions, and activation.
Refer to the NI website for information about drivers compatible with LabVIEW for Linux. To use hardware with LabVIEW 2018 SP1, install the latest version of the driver for the device. Refer to the readme of each driver for more information about system requirements and installation instructions.
You can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in LabVIEW 2018 and LabVIEW 2018 SP1.
The following items are the IDs and titles of a subset of issues fixed in LabVIEW 2018 SP1. This is not an exhaustive list of issues fixed in the current version of LabVIEW. If you have a CAR ID, you can search this list to validate the issue has been fixed.
| ID | Fixed Issue |
|---|---|
| 708128 | Undefined data types do not resolve with Malleable VIs. |
| 705899 | LabVIEW crashes when using string control with the Python Node. |
| 705605 | Separately compiled code takes longer to load with mismatched bitness. |
| 701083 | Error Ring will not accept %$ String modifiers. |
| 691392 | Searching for text crashes LabVIEW. |
| 687308 | Class constants/controls appear grey on block diagram but VI's run arrow is unbroken. |
| 677536 | Mouse cursor does not scale properly with DPI settings. |
Refer to the LabVIEW Help, accessible by selecting Help�LabVIEW Help from LabVIEW, for information about LabVIEW 2018 SP1.
Copyright
� 2004–2018 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
For end-user license agreements (EULAs) and copyright notices, conditions, and disclaimers, including information regarding certain third-party components used in LabVIEW, refer to the Copyright topic of the LabVIEW Help.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help�Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
374718K-01